[App_rpt-users] Another remote base question

[Corey Dean]

I will Try that tonight!  

Corey Dean


On Apr 20, 2012, at 1:32 PM, "Fredric Moses" <fred at moses.bz> wrote:

> did you set..    linktolink=yes   ?
> 
> --
> Fredric Moses - W8FSM - WQOG498
> fred at moses.bz
> 
> 
> 
> On Fri, Apr 20, 2012 at 11:34, Corey Dean <n3fe at repeater.net> wrote:
>> Already checked that Scott...  Wish that as all it was.... That would be easy to fix.
>> 
>> Corey Dean
>> 
>> 
>> On Apr 20, 2012, at 12:19 PM, "Scott Zimmerman" <n3xcc at repeater-builder.com> wrote:
>> 
>>> It is possible that the maxtrac is programmed to not transmit when the channel is in use. (This is
>>> an option in the RSS) I *think* it is in the "radio wide" menu(s).
>>> 
>>> Scott
>>> 
>>> Scott Zimmerman
>>> Amateur Radio Call N3XCC
>>> 474 Barnett Road
>>> Boswell, PA 15531
>>> 
>>> On 4/20/2012 12:13 PM, Corey Dean wrote:
>>>> I have been working on a single channel remote base as well recently.  I am just using a maxtrac that is on a vhf repeater channel as a user.  I may have my configuration wrong because one of the problems I am having is the remote base will not go into transmit until the receive signal on the link radio drops.  I have always understood a remote base to transmit when needed even it was receiving something.  I guess what I am trying to say is I shouldn't need to wait for the link radio's receiver to drop before I start transmitting on another node.
>>>> 
>>>> Another thing I notice is, it will transmit the connection announcement out the link radio when I connected to it from another node.  I don't think it should be doing this...
>>>> 
>>>> Can someone give me a hint as to what I can look at to see if I have something wrong.  I would put my configuration in this email but I don't have access to it right now.  I have wanted to send this email for about a week now and figured I had better ask now before I forget again.
>>>> 
>>>> Corey N3FE
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> --
>>> This message was scanned and is believed to be clean.
>>> Click here to report this message as spam.
>>> http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=1C6622103.A8D19
>>> 
>>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> --
> This message was scanned and is believed to be clean.
> Click here to report this message as spam. 
> http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=61E312103.A5ABB
> 
>