[App_rpt-users] Another remote base question

[Fredric Moses]

did you set..    linktolink=yes   ?

--
Fredric Moses - W8FSM - WQOG498
fred at moses.bz



On Fri, Apr 20, 2012 at 11:34, Corey Dean <n3fe at repeater.net> wrote:
> Already checked that Scott...  Wish that as all it was.... That would be easy to fix.
>
> Corey Dean
>
>
> On Apr 20, 2012, at 12:19 PM, "Scott Zimmerman" <n3xcc at repeater-builder.com> wrote:
>
>> It is possible that the maxtrac is programmed to not transmit when the channel is in use. (This is
>> an option in the RSS) I *think* it is in the "radio wide" menu(s).
>>
>> Scott
>>
>> Scott Zimmerman
>> Amateur Radio Call N3XCC
>> 474 Barnett Road
>> Boswell, PA 15531
>>
>> On 4/20/2012 12:13 PM, Corey Dean wrote:
>>> I have been working on a single channel remote base as well recently.  I am just using a maxtrac that is on a vhf repeater channel as a user.  I may have my configuration wrong because one of the problems I am having is the remote base will not go into transmit until the receive signal on the link radio drops.  I have always understood a remote base to transmit when needed even it was receiving something.  I guess what I am trying to say is I shouldn't need to wait for the link radio's receiver to drop before I start transmitting on another node.
>>>
>>> Another thing I notice is, it will transmit the connection announcement out the link radio when I connected to it from another node.  I don't think it should be doing this...
>>>
>>> Can someone give me a hint as to what I can look at to see if I have something wrong.  I would put my configuration in this email but I don't have access to it right now.  I have wanted to send this email for about a week now and figured I had better ask now before I forget again.
>>>
>>> Corey N3FE
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> --
>> This message was scanned and is believed to be clean.
>> Click here to report this message as spam.
>> http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=1C6622103.A8D19
>>
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users