[App_rpt-users] Saving node configuration to allstarlink.org

[Bradley Haney]

Thank you JIm..  Put that one down in my saved file of tricks  :)

On Tue, Jul 31, 2012 at 8:09 PM, Jim Duuuude <telesistant at hotmail.com> wrote:
> okay... Let's say the computer crashes...
>
> "The computer crashes"
>
> and let's say You rebuild it and you want to download the config you
> saved...
>
> "You rebuild it and you want to download the config you saved"
>
> And let's say you browse to http://backup.allstarlink.org and log in with
> your node number (as specified in /etc/asterisk/savenode.conf) and the
> NODE password of the same node....
>
> "You browse to http://backup.allstarlink.org and log in with
> your node number (as specified in /etc/asterisk/savenode.conf) and the
> NODE password of the same node"
>
> Then you will have a list of the last 4 saved tarballs that you can then
> download.
>
> :-)
>
> Jim
>
>> Date: Tue, 31 Jul 2012 13:45:09 -0500
>> From: kc9gqr at gmail.com
>> To: APP_RPT-USERS at ohnosec.org
>> Subject: [App_rpt-users] Saving node configuration to allstarlink.org
>
>>
>> I have saved our custom configuration doing i think it was a
>> savenode.sh It told me verifiying and then said something saved to
>> register.allstarlink.org.
>>
>> The 24 dollar question is.. LEts say the computer crashes.. I
>> rebuild it and now i want to down load the custom config i saved at
>> register.allstarlink.org. How would i do that.? I know i can't do
>> a portal config as that would just have the basic settings. Anyone
>> run into this?
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users