[App_rpt-users] Beagle board question

[Jon Rorke]

Try setting the carrierfrom=usbinvert. Then it will look for an active 
low from the PTT line. Setting it to usb looks for a logic high. (active hi)

Jon VA3RQ
On 8/10/2012 2:41 PM, Michael J. Wolthuis wrote:
>
> I connected my LOX board port 1 up to my linkcomm Club Deluxe 
> controller.  I ran PTT from LOX to COR on Linkcomm.
>
> However, I see the beagle.conf is set to carrierfrom=dsp and ctcssfrom=dsp
>
> I turned ctcssfrom=no
>
> And I tried carrierfrom=usb
>
> But it still acts like DSP?  In other words, it doesn't key up until 
> there is audio there.  Maybe that is normal???
>
> I am new to the LOX and Allstar, so sorry if this sounds like a bad 
> question, but I would expect if I key the radio Allstar would key up 
> when carrierfrom=usb is selected to look for the PTT from the 
> controller on the COR line of the LOX?
>
> I am listening via WebTransceiver if that matters.
>
> Mike
>
> Kb8zgl
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120810/980c0d86/attachment.html>