[App_rpt-users] Allmon

Sun Dec 2 16:24:51 UTC 2012

Jim just an FYI. I did a fresh install of ACID last night. I then installed
allmon. When veiwing the allmon anytime there was a keyup the page did not
turn green. I then updated to the latest astsrc and all was good. I would
have thought that would have already been part of a new install.

On a side note I am trying to get a couple of seperate servers to show up
on one server page. Currently I have all the boxes open to the web. Same
ports on all, login and passwds same on all. IP addresses allmon.ini
pointing to the external IP of the external server. Webpage only shows
local node. Anyone with suggestions? Or is there something I have skipped?

Thanks

Sat, Dec 1, 2012 at 12:00 PM, <app_rpt-users-request at ohnosec.org> wrote:

> Send App_rpt-users mailing list submissions to
>         app_rpt-users at ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
>         app_rpt-users-request at ohnosec.org
>
> You can reach the person managing the list at
>         app_rpt-users-owner at ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
>    1. Re: Help Motorola GM300 and app_rpt (Keith Goobie)
>    2. Re: Help Motorola GM300 and app_rpt (FERNANDO VILLARROEL)
>    3. Re: Help Motorola GM300 and app_rpt (Matt Roberts)
>    4. Re: Help Motorola GM300 and app_rpt (FERNANDO VILLARROEL)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 30 Nov 2012 14:37:28 -0400
> From: Keith Goobie <keith at goobie.org>
> To: Fernando Villarroel <fvillarroel at yahoo.com>
> Cc: APP RPT <App_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
> Message-ID: <B78A1D10-B416-4B6B-A52D-437B665EEFFA at goobie.org>
> Content-Type: text/plain; charset="utf-8"
>
> I am on iPhone right now.  Will do when I get home.
>
> Keith
>
> Sent from my iPhone
>
> On Nov 30, 2012, at 2:20 PM, Fernando Villarroel <fvillarroel at yahoo.com>
> wrote:
>
> > Dear Keith.
> >
> > Do you could tell me a sample config for usbradio.conf and rpt.conf
> because i can't doing work, or how i can do.
> >
> > Thank you for you help.
> >
> > Enviado desde mi iPhone
> >
> > El 30-11-2012, a las 13:58, Keith Goobie <keith at goobie.org> escribi?:
> >
> >> Simplex is not a cable design issue.  It is controlled from rpt.conf
> and usbradio.conf
> >>
> >> Keith
> >>
> >> Sent from my iPhone
> >>
> >> On Nov 30, 2012, at 12:53 PM, David KE6UPI <dshaw at ke6upi.com> wrote:
> >>
> >>> Are you using one radio in simplex mode? If so you need a simplex
> cable. http://www.uricables.com/motorola.html
> >>>
> >>> David
> >>>
> >>>
> >>> On Fri, Nov 30, 2012 at 8:15 AM, FERNANDO VILLARROEL <
> fvillarroel at yahoo.com> wrote:
> >>>> Dear All.
> >>>>
> >>>> I have installed ACID succesfully
> >>>>
> >>>> I have the follows devices connected:
> >>>>
> >>>> Motorola GM300 conected to my Asterisk (Centos)
> >>>>
> >>>> http://www.dmkeng.com/URI_Order_Page.htm
> >>>>
> >>>> http://www.uricables.com/DuplexMotorola.html (i have connected from
> RX Cable)
> >>>>
> >>>> I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do
> not understand why.
> >>>>
> >>>> http://allstarnode.com/viewtopic.php?f=5&t=67
> >>>>
> >>>> When i try to do *98 i have not audio in radio base and mobiles
> radios (handy).
> >>>>
> >>>> Does anyone tell me what is the best config for usbradio.conf and
> rpt.conf?
> >>>>
> >>>> I hope anyone could help me or how i can do.
> >>>>
> >>>> Fernando
> >>>>
> >>>> _______________________________________________
> >>>> App_rpt-users mailing list
> >>>> App_rpt-users at ohnosec.org
> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>
> >>> _______________________________________________
> >>> App_rpt-users mailing list
> >>> App_rpt-users at ohnosec.org
> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20121130/4e6b9ba4/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Fri, 30 Nov 2012 10:46:03 -0800 (PST)
> From: FERNANDO VILLARROEL <fvillarroel at yahoo.com>
> To: Keith Goobie <keith at goobie.org>
> Cc: APP RPT <App_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
> Message-ID:
>         <1354301163.31052.YahooMailClassic at web162005.mail.bf1.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Ok Keith.
> Thank You so much, i am trying to solve this issue from a long time (3
> weeks).
> I can send the access root for my ACID installation and my MSN ID or
> Skype, if you want.
>
> Regards
>
> --- On Fri, 11/30/12, Keith Goobie <keith at goobie.org> wrote:
>
> From: Keith Goobie <keith at goobie.org>
> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
> To: "Fernando Villarroel" <fvillarroel at yahoo.com>
> Cc: "David KE6UPI" <dshaw at ke6upi.com>, "APP RPT" <
> App_rpt-users at ohnosec.org>
> Date: Friday, November 30, 2012, 2:37 PM
>
> I am on iPhone right now. ?Will do when I get home.?
> Keith
>
> Sent from my iPhone
> On Nov 30, 2012, at 2:20 PM, Fernando Villarroel <fvillarroel at yahoo.com>
> wrote:
>
> Dear Keith.
> Do you could tell me a sample config for usbradio.conf and rpt.conf
> because i can't doing work, or how i can do.
> Thank you for you help.
>
> Enviado desde mi iPhone
> El 30-11-2012, a las 13:58, Keith Goobie <keith at goobie.org> escribi?:
>
> Simplex is not a cable design issue. ?It is controlled from rpt.conf and
> usbradio.conf
> Keith
>
> Sent from my iPhone
> On Nov 30, 2012, at 12:53 PM, David KE6UPI <dshaw at ke6upi.com> wrote:
>
> Are you using one radio in simplex mode? If so you need a simplex cable.?
> http://www.uricables.com/motorola.html
> David
>
>
> On Fri, Nov 30, 2012 at 8:15 AM, FERNANDO VILLARROEL <
> fvillarroel at yahoo.com> wrote:
>
> Dear All.
>
>
>
> I have installed ACID succesfully
>
>
>
> I have the follows devices connected:
>
>
>
> Motorola GM300 conected to my Asterisk (Centos)
>
>
>
> http://www.dmkeng.com/URI_Order_Page.htm
>
>
>
> http://www.uricables.com/DuplexMotorola.html (i have connected from RX
> Cable)
>
>
>
> I am trying to doing PTT from Zoiper and IAXrpt, but not works. I do not
> understand why.
>
>
>
> http://allstarnode.com/viewtopic.php?f=5&t=67
>
>
>
> When i try to do *98 i have not audio in radio base and mobiles radios
> (handy).
>
>
>
> Does anyone tell me what is the best config for usbradio.conf and rpt.conf?
>
>
>
> I hope anyone could help me or how i can do.
>
>
>
> Fernando
>
>
>
> _______________________________________________
>
> App_rpt-users mailing list
>
> App_rpt-users at ohnosec.org
>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20121130/723a5ad0/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Fri, 30 Nov 2012 15:59:30 -0500
> From: Matt Roberts <n9gmr at me.com>
> To: Fernando Villarroel <fvillarroel at yahoo.com>
> Cc: APP RPT <App_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
> Message-ID: <6FBEE34B-6FE3-4EE5-98A7-7EC8E9FB4C0D at me.com>
> Content-Type: text/plain; CHARSET=US-ASCII
>
>
> On Nov 30, 2012, at 1:20 PM, Fernando Villarroel wrote:
>
> > Do you could tell me a sample config for usbradio.conf and rpt.conf
> because i can't doing work, or how i can do.
> >
> I don't think your configuration files are the issue themselves.  Does
> your node work? Can you transmit to your node, and when people transmit
> from other nodes can you hear them? Is cop6 defined in RPT.conf? Cop6
> determines what command is used to activate PTT on the phone.  Has anyone
> tried connecting to your node from the portal on the phone and see if what
> is said is going out over your node?
>
>
> Matt Roberts
> n9gmr at me.com
> Call Sign N9GMR
> Allstar 28142
> EchoLink 640860
>
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 30 Nov 2012 17:41:05 -0800 (PST)
> From: FERNANDO VILLARROEL <fvillarroel at yahoo.com>
> To: Matt Roberts <n9gmr at me.com>
> Cc: APP RPT <App_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
> Message-ID:
>         <1354326065.79670.YahooMailClassic at web162006.mail.bf1.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Dear Matt.
>
> My ACID is a local installation.
>
> Yes, i did defined cop6 in rpt.conf
>
> I have not other nodes connected with this node (1999)
>
> The radio base (Motorola GM300) and mobiles radios (handys) can transmit
> very well between both.
>
> I can call from Zoiper and IAXrpt to Radio Base (1999) and i can doing the
> following commands:
>
> 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000
> 0=autopatchdn ; Autopatch down
>
> 99=cop,4 ; Audio test tone
> 98=cop,6 ; Phone TX key
>
> But COP6 not works or i can't PTT from softphnes to handys.
>
> I can call from handy to PSTN and CellPhones.
>
> When i run the following commands Asterisk show me:
>
> test*CLI> radio tune rxnoise
> tune rxnoise maxtries=12, target=23000, tolerance=2750
> tries=0, setting=2, meas=7323
> tries=1, setting=6, meas=14436
> tries=2, setting=10, meas=26213
> tries=3, setting=9, meas=25173
> tries=4, setting=9, meas=25229
> tries=5, setting=9, meas=25107
> tries=6, setting=9, meas=25344
> DONE tries=6, setting=563, meas=25344, sqnoise=8140
> INFO: RX INPUT ADJUST SUCCESS.
>
> test*CLI> radio tune rxvoice
> INFO: RX VOICE ADJUST START.
> target=7200 tolerance=360
> tries=0, setting=1.000000, meas=17354
> tries=1, setting=0.414890, meas=7179
> tries=2, setting=0.416104, meas=7674
> tries=3, setting=0.390402, meas=6842
> tries=4, setting=0.390402, meas=6866
> tries=5, setting=0.390402, meas=6956
> DONE tries=5, setting=0.390402, meas=6956.000000
> INFO: RX VOICE GAIN ADJUST SUCCESS.
>
>
> Regards.
>
> --- On Fri, 11/30/12, Matt Roberts <n9gmr at me.com> wrote:
>
> > From: Matt Roberts <n9gmr at me.com>
> > Subject: Re: [App_rpt-users] Help Motorola GM300 and app_rpt
> > To: "Fernando Villarroel" <fvillarroel at yahoo.com>
> > Cc: "Keith Goobie" <keith at goobie.org>, "APP RPT" <
> App_rpt-users at ohnosec.org>
> > Date: Friday, November 30, 2012, 4:59 PM
> >
> > On Nov 30, 2012, at 1:20 PM, Fernando Villarroel wrote:
> >
> > > Do you could tell me a sample config for usbradio.conf
> > and rpt.conf because i can't doing work, or how i can do.
> > >
> > I don't think your configuration files are the issue
> > themselves.? Does your node work? Can you transmit to
> > your node, and when people transmit from other nodes can you
> > hear them? Is cop6 defined in RPT.conf? Cop6 determines what
> > command is used to activate PTT on the phone.? Has
> > anyone tried connecting to your node from the portal on the
> > phone and see if what is said is going out over your node?
> >
> >
> > Matt Roberts
> > n9gmr at me.com
> > Call Sign N9GMR
> > Allstar 28142
> > EchoLink 640860
> >
> >
>
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 46, Issue 1
> ********************************************
>

-- 
Brian
KB3ORS

WAN-RS Tech Support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20121202/3ea2416d/attachment.html>