[App_rpt-users] Debugging COS

[Jim Whiteside]

I'm still chipping away at modifying a Startech CM108 USB fob - so far I
have successfully got PTT and audio out working, but I'm struggling with
audio in and COS.

I've been following http://www.qsl.net/k0kn/cm108_mod.html

Can anyone advise if there's a way to determine from the Asterisk side if
COS is active or not?

I've even tried manually taking the CM108 pin 48 to 0v and +5v with the
iax.conf below, but I can't seem to make anything 'happen'.

My theory was, as soon as I have COS triggering Asterisk correctly, then I
can look at getting the audio in working properly.

TIA

-- 
Jim Whiteside.
M0HPJ

[usb28233]
hdwtype=0
rxboost=1
txboost=0
rxctcssrelax=1
txctcssdefault=94.8
rxctcssfreqs=94.8
txctcssfreqs=94.8
;rxctcssoverride=0
carrierfrom=usbinvert
ctcssfrom=no
rxdemod=speaker
txprelim=no
txlimonly=no
txtoctype=notone
txmixa=composite
txmixb=no
invertptt=0
duplex=0
rxondelay=0
rxnoisefiltype=0
eeprom=0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120212/52d0687a/attachment.html>