[App_rpt-users] Tone Controll

[Jon Rorke]

I Put them on my node 2417 and it seems to make no difference.

When I send that command it said "TX PL ENA" but I still hear repeater 
tail and courtesy beeps. Is this supposed to only transmit the default 
PL tone only when a signal is coming in to the repeater?

I have that node set up as a full duplex and dsp Squelch and pl decode 
and it also encodes PL too.

Is it not supported on Version 0.281?

Jon VA3RQ


On 7/5/2012 8:57 AM, Matt Roberts wrote:
> I have those commands on my system as DTMF commands. With TXIPLENA 
> enabled, you won't hear telemetry announcements.
>
> Matt Roberts
> n9gmr at me.com <mailto:n9gmr at me.com>
>
> Sent from my iPhone
>
> On Jul 4, 2012, at 9:37 PM, Corey Dean <n3fe at repeater.net 
> <mailto:n3fe at repeater.net>> wrote:
>
>> Check out cop 58 and 59...
>>
>>
>>
>> Corey Dean. n3fe
>> Mansfield, PA
>>
>> On Jul 4, 2012, at 8:10 PM, "Ken" <ke2n at cs.com <mailto:ke2n at cs.com>> 
>> wrote:
>>
>>> What are you trying to do, exactly?
>>>
>>> Notone will stop transmitting the CTCSS tone 600 ms before the 
>>> carrier drops -- provided your hang time is long enough.
>>>
>>> Many radios need more than 600 ms though -- going more than 600 
>>> requires a small program mod and recompile.
>>>
>>> 73
>>>
>>> Ken
>>>
>>> *From:*app_rpt-users-bounces at ohnosec.org 
>>> <mailto:app_rpt-users-bounces at ohnosec.org> 
>>> [mailto:app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Eric Harrison
>>> *Sent:* Wednesday, July 04, 2012 5:31 PM
>>> *To:* Allstar User
>>> *Subject:* [App_rpt-users] Tone Controll
>>>
>>> Is anyone using tone control in  the usbradio.conf file? (txtoctype)
>>> No matter how I set this No, Phase, Notone, the tone still rides out 
>>> the squelch tail, so instead of just hear the voice audio only I get 
>>> repeater ID'S and CT's as well. Is there somethig else I'm missing?
>>>
>>> Eric (N7JYS)
>>>
>>> Marshall's Communications
>>>
>>>
>>> -- 
>>> This message was scanned and is believed to be clean.
>>> Click here to report this message as spam. 
>>> <%0Ahttp://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=776BF221E.A7330%0A> 
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120705/e3314087/attachment.html>