[App_rpt-users] echolink stuff

[torben at klimt-online.com]

where can i find an documentation over all parameters standing in the rpt.conf
tnx and 73 de tom dh6mbt


________________________________
Von: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] im Auftrag von Monty [monty at ke7jvx.com]
Gesendet: Mittwoch, 11. Juli 2012 20:50
An: pete M
Cc: APP RPT
Betreff: Re: [App_rpt-users] echolink stuff

It is a setting in /etc/asterisk/rpt.conf:

eannmode=3                     ; Default: 1 = Say only node number on echolink connects
                                        ; 2 = say phonetic call sign only on echolink connects
                                        ; 3 = say phonetic call sign and node number on echolink connects


Monty


On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001 at hotmail.com<mailto:petem001 at hotmail.com>> wrote:
Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro)

If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected..

And where can I write information, like on echolink, that describe the repeater and stuff..

And finally is there a how to for the echolink part, did not found much..

Pierre
VE2PF





_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120717/5aafaa0a/attachment.html>