[App_rpt-users] echolink stuff

[James Nessen]

You can find the chan_echolink documentation here:

http://ohnosec.org/drupal/node/56

Jim, K6JWN

On Tue, Jul 17, 2012 at 3:34 AM, torben at klimt-online.com
<torben at klimt-online.com> wrote:
>
>
> where can i find an documentation over all parameters standing in the
> rpt.conf
>
> tnx and 73 de tom dh6mbt
>
>
>
>
>
> ________________________________
> Von: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org]
> im Auftrag von Monty [monty at ke7jvx.com]
> Gesendet: Mittwoch, 11. Juli 2012 20:50
> An: pete M
> Cc: APP RPT
> Betreff: Re: [App_rpt-users] echolink stuff
>
> It is a setting in /etc/asterisk/rpt.conf:
>
> eannmode=3                     ; Default: 1 = Say only node number on
> echolink connects
>                                         ; 2 = say phonetic call sign only on
> echolink connects
>                                         ; 3 = say phonetic call sign and
> node number on echolink connects
>
>
> Monty
>
>
> On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001 at hotmail.com> wrote:
>>
>> Is there a way for a node to specify the call sign rather then the node
>> number whe they connect from echolink? ( I am using the acid distro)
>>
>> If someone connect by the portal we can hear that ve2xx conected, but from
>> the echolink we will hear node 12345 connected..
>>
>> And where can I write information, like on echolink, that describe the
>> repeater and stuff..
>>
>> And finally is there a how to for the echolink part, did not found much..
>>
>> Pierre
>> VE2PF
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>