[App_rpt-users] Double ID's

[Alan Adamson]

HMM.

NOTE, I've recently updated to the latest svn and since then noticed this.

Anyone noticed that on an initial ID after setting idle for some time, when
you have 2 nodes connected.  When a signal comes in on the remote node, it
causes the local node to start the ID, about 2/3 through, it cuts off the
first one and immediately generates a second as if it were one complete ID.

Doesn't do it all the time. .. 

Any idea what change in the code may have done this?

Alan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120608/d9537c78/attachment.html>