[App_rpt-users] Double ID's

[Jim Duuuude]

IF you have idrecording set to a morse id, leave idtalkover unset

Jim WB6NIL
From: adamson_alan at hotmail.com
To: app_rpt-users at ohnosec.org
Date: Fri, 8 Jun 2012 12:16:56 -0400
Subject: [App_rpt-users] Double ID's






Double ID's




HMM…

NOTE, I've recently updated to the latest svn and since then noticed this…

Anyone noticed that on an initial ID after setting idle for some time, when you have 2 nodes connected.  When a signal comes in on the remote node, it causes the local node to start the ID, about 2/3 through, it cuts off the first one and immediately generates a second as if it were one complete ID.



Doesn't do it all the time… …. 

Any idea what change in the code may have done this?

Alan





_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120608/013f5679/attachment.html>