[App_rpt-users] Zaptel Issue
Don Hackler
donh at sigma.net
Mon Jun 11 05:19:55 UTC 2012
I fought this problem for days on a new install….
I installed several times, same problem.
It turned out my Acid download and/or CD burn was corrupt.
When I did a fresh download, burned a new CD, and installed from scratch, it finally started working.
On Jun 10, 2012, at 8:30 PM, Travis Best wrote:
> 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
> 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them .
> 3. If you need Zaptel services, you must correctly configure Zaptel.
> [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s:
> 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
> 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them .
> 3. If you need Zaptel services, you must correctly configure Zaptel.
> [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s:
>
>
> Anyone have any ideas???? Just started out of the blue
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
More information about the App_rpt-users
mailing list