[App_rpt-users] Zaptel Issue

[Travis Best]

Issue resolved edited the  /etc/sysconfig/zaptel so that only the 
ztdummy was the only driver loading now it works fine

On 6/11/2012 1:19 AM, Don Hackler wrote:
> I fought this problem for days on a new install….
> I installed several times, same problem.
> It turned out my Acid download and/or CD burn was corrupt.
> When I did a fresh download, burned a new CD, and installed from scratch, it finally started working.
>
>
> On Jun 10, 2012, at 8:30 PM, Travis Best wrote:
>
>>      1. You only have to compile Zaptel support into Asterisk if you need it.                                                                                                   One option is to recompile without Zaptel support.
>>         2. You only have to load Zaptel drivers if you want to take advantage of                                                                                                  Zaptel services.  One option is to unload zaptel modules if you don't need them                                                                                                 .
>>         3. If you need Zaptel services, you must correctly configure Zaptel.
>> [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y                                                                                                 our Zaptel configuration and will shutdown for your protection.  You have option                                                                                                 s:
>>         1. You only have to compile Zaptel support into Asterisk if you need it.                                                                                                   One option is to recompile without Zaptel support.
>>         2. You only have to load Zaptel drivers if you want to take advantage of                                                                                                  Zaptel services.  One option is to unload zaptel modules if you don't need them                                                                                                 .
>>         3. If you need Zaptel services, you must correctly configure Zaptel.
>> [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y                                                                                                 our Zaptel configuration and will shutdown for your protection.  You have option                                                                                                 s:
>>
>>
>> Anyone have any ideas????  Just started out of the blue
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


-- 
Travis M. Best| Central Area ACS Officer | W3TMB
Pennsylvania Emergency Management Agency
2605 Interstate Drive | Harrisburg | PA 17110
Phone: 570-279-1746
Email: ca-acso at pa.gov

www.PEMA.state.pa.us

"This e-mail message, including any attachments, is intended for the sole use of the individual(s) and entity(ies) to who it is addressed and may contain information that is privileged, confidential and exempt from disclosure under the applicable law.  If you are not the intended addressee, nor authorized to receive for the intended addressee, you are notified that you may not use, copy, disclose or distribute any information contained in this e-mail message.  If you have received this message in error, immediately notify the sender and delete the message."


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3729 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120611/fc9949f3/attachment.bin>