[App_rpt-users] Dialing from RF to SIP/IAX CLIENT..

Wed Jun 13 18:48:32 UTC 2012

I have used the callers ID to route the incoming call and used a signal DID
for the allstar node. push 1 for the repeater and push 2 for the remote
base.

David

On Mon, Jun 11, 2012 at 2:40 PM, Bradley Haney <kc9gqr at gmail.com> wrote:

> Could i do this instead..
>
> The orginal autopatch is  *6   and then i dial a number   and it goes
> through magic of the allstarlink autopatch config..
>
> what happens if i  put in
> 7=autopatchup,context=nodeop,noct=1,farenddisconnect=1,dialtime=2000
>
> Could i put that as an seperate line..  so then if i just did a *6  it
> would go out    Allstarlink  autopatch and then  if i did  *7  it
> would go to the other context of nodeop..
>
> Or am i thinking off the wall here.
>
> On Mon, Jun 11, 2012 at 3:43 PM, Monty <monty at ke7jvx.com> wrote:
> > This is the one I used:
> >
> > http://cdn.oreilly.com/books/9780596510480.pdf
> >
> >
> > Monty
> >
> >
> >
> >
> > On Mon, Jun 11, 2012 at 1:11 PM, Bradley Haney <kc9gqr at gmail.com> wrote:
> >>
> >> My wife  trained me well as she got tired  of me not asking for
> >> directions on vacation.  :)
> >>
> >> I think i better do all of this testing  on my test box instead of our
> >> box that is running our repeater  :)
> >>
> >> On Mon, Jun 11, 2012 at 3:00 PM, Alan Adamson <adamson_alan at hotmail.com
> >
> >> wrote:
> >> > Ah, there must be one online somewhere, you can't be the first to need
> >> > to
> >> > know :)...
> >> >
> >> > Alan
> >> >
> >> > ps. if you find one, make sure you give us *all* a link to it... (cuz
> >> > there
> >> > are those closet confused dialplan wannabees that are afraid to say
> so)
> >> > :)
> >> >
> >> > -----Original Message-----
> >> > From: app_rpt-users-bounces at ohnosec.org
> >> > [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bradley Haney
> >> > Sent: Monday, June 11, 2012 3:37 PM
> >> > To: Jim Duuuude
> >> > Cc: app_rpt mailing list; ke7jvx at gmail.com
> >> > Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT..
> >> >
> >> > Looks like i better buy an asterisk book to figure out dial plans!!
> >> >
> >> > On Mon, Jun 11, 2012 at 2:29 PM, Jim Duuuude <telesistant at hotmail.com
> >
> >> > wrote:
> >> >> Or, I suppose you could augment it, if you weren't dyslexic like me
> >> >> :-).
> >> >>
> >> >> Jim
> >> >>
> >> >> ________________________________
> >> >> From: telesistant at hotmail.com
> >> >> To: kc9gqr at gmail.com; ke7jvx at gmail.com
> >> >> Date: Mon, 11 Jun 2012 11:56:53 -0700
> >> >>
> >> >> CC: app_rpt-users at ohnosec.org
> >> >> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT..
> >> >>
> >> >>
> >> >> you can just agument the [radio] stanza in the extensions.conf
> >> >> to add dialplan entries for whatever you want.
> >> >>
> >> >> Jim
> >> >>
> >> >>> Date: Mon, 11 Jun 2012 13:54:43 -0500
> >> >>> From: kc9gqr at gmail.com
> >> >>> To: ke7jvx at gmail.com
> >> >>> CC: app_rpt-users at ohnosec.org
> >> >>> Subject: Re: [App_rpt-users] Dialing from RF to SIP/IAX CLIENT..
> >> >>>
> >> >>> Would anyone know how to intergate this if you already use the
> >> >>> allstarlink autopatch? OUr club is using the alltarlink autopatch
> >> >>> for 5.00 a month and we would like to add a few SIP/IAX extensions
> >> >>> so the Rf users coudl dial out on autopatch and then also dial the
> >> >>> extension numbers. Is it possible to have both or would i have to
> get
> >> >>> rid of the allstarlink autopatch?
> >> >>>
> >> >>> Or is there an easy way to configure it so if you wanted to dial
> >> >>> out on the autopatch you have to do a *6 for autopatch and then lets
> >> >>> say 9 for an outside line?
> >> >>>
> >> >>>
> >> >>> Bradley
> >> >>>
> >> >>> On Mon, Jun 11, 2012 at 1:41 PM, Monty Dana <ke7jvx at gmail.com>
> wrote:
> >> >>> > This is what I used from Keith KF7DRV:
> >> >>> >
> >> >>> >
> http://ohnosec.org/pipermail/app_rpt-users/2010-February/000787.html
> >> >>> >
> >> >>> > Monty
> >> >>> >
> >> >>> >
> >> >>> > On Sat, Jun 9, 2012 at 9:11 PM, Bradley Haney <kc9gqr at gmail.com>
> >> >>> > wrote:
> >> >>> >>
> >> >>> >> Hello all..  looked up the great info on getting a  iax client
> >> >>> >> working
> >> >>> >>  on our repeater.. I can dial our node number now from a IAX
> client
> >> >>> >> on
> >> >>> >> my phone and   use *99 to tx and # to  stop  Tx and listen..
>  Now
> >> >>> >> I
> >> >>> >> would like to be able to  "Call" my phone from the repeater.   We
> >> >>> >> are
> >> >>> >> currently using allstarlink's  Autopatch also..  so would i just
> >> >>> >> dial
> >> >>> >> *6 and then the extension number i created?
> >> >>> >>  or would i have to do more work  in the extensions.conf dept.
> >> >>> >>
> >> >>> >> Thanks for all the help in advance..
> >> >>> >>
> >> >>> >> Bradley
> >> >>> >> _______________________________________________
> >> >>> >> App_rpt-users mailing list
> >> >>> >> App_rpt-users at ohnosec.org
> >> >>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >> >>> >
> >> >>> >
> >> >>> _______________________________________________
> >> >>> App_rpt-users mailing list
> >> >>> App_rpt-users at ohnosec.org
> >> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >> >>
> >> >> _______________________________________________ App_rpt-users mailing
> >> >> list
> >> >> App_rpt-users at ohnosec.org
> >> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >> > _______________________________________________
> >> > App_rpt-users mailing list
> >> > App_rpt-users at ohnosec.org
> >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >> >
> >
> >
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120613/a17558fd/attachment.html>