[App_rpt-users] Setting up a Pico node with Pickle

[Jim Duuuude]

doesn't it have a 'nodesetup' or 'nodesetup.sh' just like
ACID and/or Limey Linux? I could have sworn I put on there.

Jim

> Date: Fri, 15 Jun 2012 00:26:11 -0500
> From: kc5fog at sbcglobal.net
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Setting up a Pico node with Pickle
> 
> I have a Beagle Board with LOX and am trying to set it up but running 
> into a brick wall. I've installed pickle on the SD card, booted the 
> beagle up, logged in and configured the network setting but now what? 
> I've configured a node using the ACID Linux and expected sorta the same 
> thing with it asking me to enter my Allstarlink.org credentials and 
> going from there but after setting up the network I'm just stuck with a 
> command prompt. I've searched through this list server and spend a 
> couple hours on Google but have not been able to find a "How-to" with 
> setting up pickle. Can someone point me in the direction on what I need 
> to do to set up pico/pickle.
> 
> 
> Eric Moeller
> N5FOG
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120615/5c64916d/attachment.html>