[App_rpt-users] Alternate port to 4569

[(KP4TR)Ramon Gonzalez]

Great! This is helpful. That way I can test out 2 servers connected to 
the same IP address before I ship to alternate site.

Thanks!


On 6/21/2012 1:43 AM, Don Hackler wrote:
> You can use alternate ports for IAX.
> I'm using 4568, since 4569 is already occupied by another Asterisk switch.
>
> You have to be careful of the order of the bind port and bind address 
> in iax.conf and I think you have to call them both out if you are not 
> using the default port.   This is what's working in my iax.conf:
> . . .
> [general]
> bindport=4568
> bindaddr=0.0.0.0
> . . .
>
>
> You also have to call out the port number in the  server configuration 
> -> (your server ID) -> network configuration of the portal.
> This is how the other nodes find out they need to connect to you on 
> your alternate port number.
>
>
> On Jun 20, 2012, at 10:02 PM, (KP4TR)Ramon Gonzalez wrote:
>
>> Hello,
>>
>> This may be a simple question. In iax.conf, it indicates the default 
>> UDP port to bind to (4569). Is it possible to use an alternate port 
>> other than 4569 and make change here?
>>
>> In some other post they mention to change configuration on allstar 
>> server network settings, but I don't believe that has anything to do 
>> other than to download that configuration to the server if requested 
>> by me.
>>
>> I know port forwarding needs to change in router and asterisk restarted.
>>
>> Thanks.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120621/e2b0dd26/attachment.html>