[App_rpt-users] Interfacing with vx7000 Yaesu repeater

[Doug Bade]

If you wish to encode external CTCSS you need to use the 25 pin connector,
if you want the repeater to encode for you, then you can use the Line
modular connector.

I would use the 25 pin accy connector...as ctcss can be controlled instead
of just on all the time..

Doug

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bradley Haney
Sent: Monday, March 26, 2012 1:31 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Interfacing with vx7000 Yaesu repeater

Has anyone interfaced  a DMK URI and  Vx7000  I would like to  have the
computer at the site  instead of doing it remotely.  Would you use the ACC
connector on the rear of the  repeater or the rj45 plug on the rear of the
machine.  Any Help would be great.

Bradley
kc9gqr
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users