[App_rpt-users] Alinco/URI setup
Ken
ke2n at cs.com
Thu Nov 1 00:32:13 UTC 2012
Alinco "DR" FM radios from 6m to 440 have a 9600 packet output that works
well with asterisk. The DB9 connector in the back is easy to wire up.
You put the radio in packet mode then the speaker is muted.
Ken
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jeffrey S. Carrier
Sent: Wednesday, October 31, 2012 6:31 PM
To: Peter Watkins; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Alinco/URI setup
You'll need to be using discriminator audio for that which depends on the
model of the radio and how deeply you want to dig into it. I use motorola's
because it's all on the accessory connector. It also looks like you don't
have your node setup because 1999 is the default node number for a new
install.
Jeff
_____
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Peter Watkins
Sent: Tuesday, October 30, 2012 4:25 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Alinco/URI setup
Hello,
I'm beginning the process of setting up a node with an Alinco radio and a
URI.
I have tried to execute the following command "radio tune rxnoise" and
received
the following message:
"DONE tries=12, setting=1000, meas=1058, sqnoise=290
ERROR: RX INPUT ADJUST FAILED.
[Oct 30 06:47:51] NOTICE[2525]: chan_iax2.c:9712 socket_process:
Registration of '1999' rejected: 'Registration Refused' from:
'67.215.233.178'"
I'm extremely new to thjs, and would appreciate any help.
Thanks and 73 Peter VK3TKK
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20121031/a39494e5/attachment.html>
More information about the App_rpt-users
mailing list