[App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1

Sat Oct 6 11:41:38 UTC 2012

Very interesting.. I will try that and report back..

The odd thing is that Asterisk will eventually start, but it takes about 5
minutes or so to settle down.

KA4EPS

From: Don Hackler [mailto:donh at sigma.net] 
Sent: Saturday, October 06, 2012 3:00 AM
To: app_rpt-users at ohnosec.org
Cc: Lu Vencl; Scott Weis; Steve Agee
Subject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith
exit status 1

When I had this problem, I tried to install a few times and kept coming up
with this error.  I had to download a fresh copy of the install CD to

correct the problem.  There was a subtle problem in the downloaded bits on
the first CD.

On Oct 5, 2012, at 10:44 PM, Steve Agee <n5zua at earthlink.net> wrote:

I'm having this issue as well on a fresh install. The machine is 64 bit:

[Oct  5 22:42:47] ERROR[23279] asterisk.c: Asterisk has detected a problem
with your Zaptel configuration and will shutdown for your protection.  You
have options:
        1. You only have to compile Zaptel support into Asterisk if you need
it.  One option is to recompile without Zaptel support.
        2. You only have to load Zaptel drivers if you want to take
advantage of Zaptel services.  One option is to unload zaptel modules if you
don't need them.
        3. If you need Zaptel services, you must correctly configure Zaptel.
mpg123: no process killed
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.

N5ZUA

----- Original Message ----- 

From: Scott Weis <mailto:kb2ear at kb2ear.net>  

To: 'Lu Vencl' <mailto:vencl at att.net>  ; app_rpt-users at ohnosec.org 

Sent: Friday, October 05, 2012 9:23 PM

Subject: Re: [App_rpt-users] mpg123: no process killed - Asterisk endedwith
exit status 1

Your system most likely updated it's kernel.. So you need to rebuild/install
zaptel.

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Lu Vencl
Sent: Friday, October 05, 2012 9:42 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] mpg123: no process killed - Asterisk ended with
exit status 1

Anyone know why a new node I just built goes through several of these before
settling down after a reboot?

I have hear this complaint from someone else before, but he can't remember
what he did to fix his node.

Thanks

Lu

KA4EPS