[App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1
Jim Duuuude
telesistant at hotmail.com
Sat Oct 6 19:06:21 UTC 2012
yes, perhaps that would be a good idea :-)
Jim
From: n5zua at earthlink.net
To: app_rpt-users at ohnosec.org
Date: Sat, 6 Oct 2012 12:36:20 -0500
Subject: [App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status 1
Same here. Mabye time to ask Dude to take a look at
it. Zaptel seems to not be happy.
N5ZUA
----- Original Message -----
From:
Lu Vencl
To: Don Hackler
Cc: <app_rpt-users at ohnosec.org>
; Scott Weis ;
Steve Agee
Sent: Saturday, October 06, 2012 12:32
PM
Subject: Re: [App_rpt-users] mpg123: no
process killed - Asterisk endedwith exit status 1
Did the new install again with a new cd I burned and still have the same
issue.
Sent from my iPhone, Lu Vencl
On Oct 6, 2012, at 12:52 PM, Don Hackler <donh at sigma.net> wrote:
I had the same thing… about 5 minutes later
asterisk would finally stay up, but there would be other problems when I
would try to
make connections to radios work. One way audio, among other
things. I spent a few days trying to troubleshoot it.
When I finally did a fresh download and re-installed from scratch,
everything just came up and worked as expected.
The other problem I had with that bad disk was the dictionary package
was missing, so when you tried to set the
password during the install, the root password wasn't getting set, so I
would have to boot it in single user mode and force a password into
it.
On Oct 6, 2012, at 4:41 AM, "Lu Vencl" <vencl at att.net> wrote:
Very interesting.. I will try that and
report back..
The odd thing is that Asterisk will
eventually start, but it takes about 5 minutes or so to settle
down.
KA4EPS
From: Don Hackler [mailto:donh at sigma.net]
Sent: Saturday, October 06, 2012 3:00
AM
To: app_rpt-users at ohnosec.org
Cc: Lu Vencl; Scott Weis; Steve
Agee
Subject: Re:
[App_rpt-users] mpg123: no process killed - Asterisk endedwith exit status
1
When
I had this problem, I tried to install a few times and kept coming up with
this error. I had to download a fresh copy of the install CD
to
correct
the problem. There was a subtle problem in the downloaded bits on
the first CD.
On
Oct 5, 2012, at 10:44 PM, Steve Agee <n5zua at earthlink.net>
wrote:
I'm having this
issue as well on a fresh install. The machine is 64 bit:
[Oct 5
22:42:47] ERROR[23279] asterisk.c: Asterisk has detected a problem with
your Zaptel configuration and will shutdown for your protection. You
have options:
1. You only
have to compile Zaptel support into Asterisk if you need it. One
option is to recompile without Zaptel
support.
2. You only have to
load Zaptel drivers if you want to take advantage of Zaptel
services. One option is to unload zaptel modules if you don't need
them.
3. If you need Zaptel
services, you must correctly configure Zaptel.
mpg123: no process
killed
Asterisk ended with exit status 1
Asterisk died with code
1.
Automatically restarting Asterisk.
N5ZUA
----- Original
Message -----
From: Scott
Weis
To: 'Lu Vencl' ; app_rpt-users at ohnosec.org
Sent: Friday, October 05, 2012 9:23
PM
Subject: Re: [App_rpt-users] mpg123: no
process killed - Asterisk endedwith exit status
1
Your system most likely updated it’s
kernel.. So you need to rebuild/install zaptel.
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Lu
Vencl
Sent: Friday, October 05, 2012 9:42
PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] mpg123: no
process killed - Asterisk ended with exit status
1
Anyone
know why a new node I just built goes through several of these before
settling down after a reboot?
I
have hear this complaint from someone else before, but he can’t remember
what he did to fix his node.
Thanks
Lu
KA4EPS
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
mpg123:
no process killed
Asterisk
ended with exit status 1
Asterisk
died with code 1.
Automatically
restarting Asterisk.
_______________________________________________
App_rpt-users
mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users
mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20121006/555458c0/attachment.html>
More information about the App_rpt-users
mailing list