[App_rpt-users] app_rpt svn - The Long version of my insanity
Richard Gilman
rgilman at myndzi.com
Wed Oct 17 17:24:24 UTC 2012
Hi All,
A while ago, I was messing around flashing different firmware images on a Linksys WRT54GL v1.1 access point so I could extend the range a bit. While on that adventure, I noticed a few guys were making hardware modifications to expand their capability. Well, that sounded fun, so I proceeded to add an SD Card socket, 2 Serial Ports and 2 USB ports to that little guy. (Kismet etc. fun... the white hat version of course :-))
After playing around with that for a while, I kept thinking that the WRT54GL might be a candidate for that mobile allstar micro node I’ve been wanting to build. I already had the URIx from DMK and I heard some guys were running Asterisk on these things. The WRT54GL runs on 12vdc, has wireless 802.11b/g and by using my Verizon UML290 on one of the USB ports, it could act as a portable hotspot/unix host. The SD card gives me plenty of room to install Asterisk so being this close already, I decided to give the allstar node a try.
I realize that the WRT54GL is at or slightly below the minimum hardware requirements, but it might be just enough to work as a simplex node so here is where I’m at…..
16 Megs of RAM
Openwrt Backfire 10.03.1, r29592
2 Gig SD Card ext3 mounted as rootfs
2 Serial ports – 1 for console and the other for GPS
2 USB v1.1 ports – Yeah I know….just maybe though
UML290 3g/4g model on 1 USB port - working
URIx on the other USB - recognized as sound card
Separate 1500 mw regulated 5vdc supply for the MAX 233 ttl to Serial and USB ports
Wouxun KG-UV3D - via a URI cable for testing - not tested yet
I have the Openwrt buildroot environment setup on another Linux box (Fedora 16 VM)so I can build images and cross compile packages that will run on the Broadcom Chipset. I have the tonezone module compiled and running already but I am still working to get the zaptel kernel module to compile cleanly and then I can work on app_rpt (The Openwrt Astreisk distro doesn't have it). I noticed that the svn code for ACID Linux (Thanks Alan for pointing me in that direction) is optimized for uClibc and so is Openwrt. I’ll see if I can add that as a custom feed and compile it under the buildroot. I’m pretty rusty at this, but it is starting to slowly come back.
I know this sounds insane, but I’m having a whole lot of fun with my insanity
Any pointers will be greatly appreciated!!!
Thanks,
Rich – KJ6NMY
73’s
-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of app_rpt-users-request at ohnosec.org
Sent: Wednesday, October 17, 2012 9:00 AM
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 44, Issue 33
Send App_rpt-users mailing list submissions to
app_rpt-users at ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request at ohnosec.org
You can reach the person managing the list at
app_rpt-users-owner at ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re: App_rpt-users Digest, Vol 44, Issue 32 (Bradley Haney)
----------------------------------------------------------------------
Message: 1
Date: Wed, 17 Oct 2012 10:31:48 -0500
From: Bradley Haney <kc9gqr at gmail.com>
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 44, Issue 32
Message-ID:
<CAPg-ThQ+847_hyUbKpRRw4=bW=jM_P6hgHydJwwQ3kLJ1+h5Eg at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
If anyone is using a Zxeyl DSL modem don't use the routing
functions.. Bridge it and use a different router.. I had the same
problem and swapped several modems out from the DSL company and still same out come. Once i bridged the modem and put a router in line it works 24/7 with no problem..
On Wed, Oct 17, 2012 at 9:15 AM, <app_rpt-users-request at ohnosec.org> wrote:
> Send App_rpt-users mailing list submissions to
> app_rpt-users at ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request at ohnosec.org
>
> You can reach the person managing the list at
> app_rpt-users-owner at ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
> 1. Cant connect one more time! (Jim W7RY)
> 2. Re: Cant connect one more time! (Jim W7RY)
> 3. app_rpt svn (Richard Gilman)
> 4. Re: app_rpt svn (Jim Duuuude)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 16 Oct 2012 21:01:22 -0700
> From: "Jim W7RY" <w7ry at centurytel.net>
> To: <app_rpt-users at ohnosec.org>
> Subject: [App_rpt-users] Cant connect one more time!
> Message-ID: <7340A5C3255A497A9FE45D156646031E at JimsLaptop>
> Content-Type: text/plain; charset="utf-8"
>
> Why cant I connect? I?m about ready to just shut it off... I don?t need the headache!
>
> Jim W7RY
>
>
>
> w7ry*CLI> iax2 show registry
> Host dnsmgr Username Perceived Refresh State
> 67.215.233.178:4569 N 28238 76.9.248.101:4569 60 Registered
> w7ry*CLI> rpt fun 28238 *32560
> -- Call accepted by 208.70.77.197 (format ulaw)
> -- Format for call is ulaw
> -- Hungup 'IAX2/208.70.77.197:4569-643'
> -- Hungup 'Zap/pseudo-1681955686'
> -- Hungup 'Zap/pseudo-740754801'
> -- <Zap/pseudo-662374073> Playing 'rpt/node' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'digits/2' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'digits/5' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'digits/6' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'digits/0' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'rpt/connection_failed' (language 'en')
> -- Hungup 'Zap/pseudo-662374073'
> w7ry*CLI> w7ry*CLI> iax2 show registry
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121016/9feab
> 30f/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 16 Oct 2012 21:14:34 -0700
> From: "Jim W7RY" <w7ry at centurytel.net>
> To: <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Cant connect one more time!
> Message-ID: <9EC1A048D3A2457284667E18BC100DE3 at JimsLaptop>
> Content-Type: text/plain; charset="utf-8"
>
> Had to reboot to get it to connect which I have to do frequently.
>
> All of you ?I haven't rebooted my node for 2 years? folks care to weigh in as to why I have to reboot to get it to connect?
>
> 73
> Jim W7RY
>
>
>
> From: Jim W7RY
> Sent: Tuesday, October 16, 2012 9:01 PM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Cant connect one more time!
>
> Why cant I connect? I?m about ready to just shut it off... I don?t need the headache!
>
> Jim W7RY
>
>
>
> w7ry*CLI> iax2 show registry
> Host dnsmgr Username Perceived Refresh State
> 67.215.233.178:4569 N 28238 76.9.248.101:4569 60 Registered
> w7ry*CLI> rpt fun 28238 *32560
> -- Call accepted by 208.70.77.197 (format ulaw)
> -- Format for call is ulaw
> -- Hungup 'IAX2/208.70.77.197:4569-643'
> -- Hungup 'Zap/pseudo-1681955686'
> -- Hungup 'Zap/pseudo-740754801'
> -- <Zap/pseudo-662374073> Playing 'rpt/node' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'digits/2' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'digits/5' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'digits/6' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'digits/0' (language 'en')
> -- <Zap/pseudo-662374073> Playing 'rpt/connection_failed' (language 'en')
> -- Hungup 'Zap/pseudo-662374073'
> w7ry*CLI> w7ry*CLI> iax2 show registry
>
>
> ----------------------------------------------------------------------
> ---------- _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121016/d03cd
> 8c2/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 17 Oct 2012 07:07:30 -0700
> From: "Richard Gilman" <rgilman at myndzi.com>
> To: <app_rpt-users at ohnosec.org>
> Subject: [App_rpt-users] app_rpt svn
> Message-ID: <35bb01cdac70$bf8b1450$3ea13cf0$@com>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi All,
>
> First, I'd like to apologize in advance for being a nooby here, but I
> guess we all start out that way :-)
>
> My question is...where can I find the latest version of app_rpt from svn?
> The link on the "Manual Configure Support Page" is not working and I'm
> not finding much via web searches.
>
> I need to cross compile it to run on an embedded system project I am
> working on.
>
> Thanks,
>
> Rich - KJ6NMY
> 73's
>
>
>
> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org
> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of
> app_rpt-users-request at ohnosec.org
> Sent: Monday, October 15, 2012 9:00 AM
> To: app_rpt-users at ohnosec.org
> Subject: App_rpt-users Digest, Vol 44, Issue 31
>
> Send App_rpt-users mailing list submissions to
> app_rpt-users at ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request at ohnosec.org
>
> You can reach the person managing the list at
> app_rpt-users-owner at ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than
> "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
> 1. +++ RTCM and digital Transceiver +++ (kbaumann)
> 2. Re: Alternate IAX port >> bind port not working - the fix
> (Jon Rorke)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 14 Oct 2012 19:40:00 +0200
> From: "kbaumann" <kbaumann at chello.at>
> To: <app_rpt-users at ohnosec.org>
> Subject: [App_rpt-users] +++ RTCM and digital Transceiver +++
> Message-ID: <000501cdaa32$ef837930$ce8a6b90$@at>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi,
>
> Because my first RTCM works perfect with our local Fm Repeater i would
> like to connect a Motorola Tetra mobile with the second RTCM.
>
> The problem is: there is no COR Signal and also there is no
> discriminator noise (only ready to go audio) to adjust the Squelch. Is
> there a solution to bring them together?
>
> The SQL is not adjustable - JP1 ON or OFF gives no solution.
>
>
>
> Thank you
>
> Kurt
>
> OE1KBC
>
>
>
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121014/e0b17
> c64/at
> tachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 15 Oct 2012 10:03:11 -0400
> From: Jon Rorke <jrorke at cogeco.ca>
> Cc: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Alternate IAX port >> bind port not
> working - the fix
> Message-ID: <507C179F.3050307 at cogeco.ca>
> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
>
> OK I now have it working for me.
> The bindport in IAX.conf needed to be changed to 4570 and then server
> info on the Allstar portal also needed to be changed.
>
> Thanks to Brian for the missing piece of info. The last time I had to
> do this was when there was no portal config.
>
> Jon VA3RQ
>
>> have you changed the port you use AT the portal? ie the server
>> configuration, network configuration tab?
>>
>> if you have a node that needs to be on a different port, the
>> underlying server needs to be moved both at the end, as well as at
>> the mother ship.
>>
>> had the same problem until i had everything lined up.
>>
>> --
>> Bryan
>> Sent from my iPhone 5
>> please forgive misspellings...
>
>
>
> On 10/12/2012 11:31 AM, George Csahanin wrote:
>> On my node 28599 here's where I had to make mods to reflect using
>> port
>> 4570:
>> root at nat:/etc/asterisk <mailto:root at nat:/etc/asterisk># grep 4570 *
>> iax.conf:bindport=4570
>> iax_rpt_custom.conf:bindport=4570
>> root at nat:/etc/asterisk <mailto:root at nat:/etc/asterisk># There are no
>> ports indicated in rpt.conf.
>> It all works fine, others can connect, and webtransceiver works fine.
>> I also do not use portal configuration as it won't let me ser CW ID
>> at
>> 30 WPM
>> GeorgeC
>>
>> ----- Original Message -----
>> *From:* Robert Poff <mailto:wb3awj at comcast.net>
>> *To:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
>> *Sent:* Friday, October 12, 2012 8:32 AM
>> *Subject:* Re: [App_rpt-users] Alternate IAX port >> bind port not
>> working
>>
>> Just for drill... if you move into /etc/asterisk and do "fgrep
>> 4569 *" and "fgrep 4570 *".
>> What do get back?
>>
>> Here's what I see with my alternate port 4565 (on XIPAR) :
>> iax_general_custom.conf:bindport=4565
>> rpt.conf:28695 = radio at 127.0.0.1
>> <mailto:radio at 127.0.0.1>:4565/28695,NONE ;KVHF 10m
>> Receiver - ME
>> rpt.conf:12958 = radio at 209.213.169.196
>> <mailto:radio at 209.213.169.196>:4565/12958,NONE ;KVHF 10m
>> Transmitter
>>
>> --
>> /Robert A. Poff/
>> /Loganville, PA/
>>
>> */S/V Loon <http://wb3awj.hobby-site.org/loon.htm>/*
>> /1983 Hunter 34/
>> /Havre de Grace, MD./
>>
>> WB3AWJ/- Allstar 27784/
>> /Powered by Linux/
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121015/da092
> 329/at
> tachment-0001.html>
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 44, Issue 31
> *********************************************
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 17 Oct 2012 07:15:09 -0700
> From: Jim Duuuude <telesistant at hotmail.com>
> To: <rgilman at myndzi.com>, app_rpt mailing list
> <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] app_rpt svn
> Message-ID: <BLU155-W4B2AD3EFCF62D107701E9B1770 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
> Youre right.. svn.ohnosec.org seems to be poo-ped at the moment.. Ill
> send a message to the ohnosec.org dude and see what is going on.
>
>> From: rgilman at myndzi.com
>> To: app_rpt-users at ohnosec.org
>> Date: Wed, 17 Oct 2012 07:07:30 -0700
>> Subject: [App_rpt-users] app_rpt svn
>>
>> Hi All,
>>
>> First, I'd like to apologize in advance for being a nooby here, but I
>> guess we all start out that way :-)
>>
>> My question is...where can I find the latest version of app_rpt from svn?
>> The link on the "Manual Configure Support Page" is not working and
>> I'm not finding much via web searches.
>>
>> I need to cross compile it to run on an embedded system project I am
>> working on.
>>
>> Thanks,
>>
>> Rich - KJ6NMY
>> 73's
>>
>>
>>
>> -----Original Message-----
>> From: app_rpt-users-bounces at ohnosec.org
>> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of
>> app_rpt-users-request at ohnosec.org
>> Sent: Monday, October 15, 2012 9:00 AM
>> To: app_rpt-users at ohnosec.org
>> Subject: App_rpt-users Digest, Vol 44, Issue 31
>>
>> Send App_rpt-users mailing list submissions to
>> app_rpt-users at ohnosec.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> or, via email, send a message with subject or body 'help' to
>> app_rpt-users-request at ohnosec.org
>>
>> You can reach the person managing the list at
>> app_rpt-users-owner at ohnosec.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than
>> "Re: Contents of App_rpt-users digest..."
>>
>>
>> Today's Topics:
>>
>> 1. +++ RTCM and digital Transceiver +++ (kbaumann)
>> 2. Re: Alternate IAX port >> bind port not working - the fix
>> (Jon Rorke)
>>
>>
>> ---------------------------------------------------------------------
>> -
>>
>> Message: 1
>> Date: Sun, 14 Oct 2012 19:40:00 +0200
>> From: "kbaumann" <kbaumann at chello.at>
>> To: <app_rpt-users at ohnosec.org>
>> Subject: [App_rpt-users] +++ RTCM and digital Transceiver +++
>> Message-ID: <000501cdaa32$ef837930$ce8a6b90$@at>
>> Content-Type: text/plain; charset="us-ascii"
>>
>> Hi,
>>
>> Because my first RTCM works perfect with our local Fm Repeater i
>> would like to connect a Motorola Tetra mobile with the second RTCM.
>>
>> The problem is: there is no COR Signal and also there is no
>> discriminator noise (only ready to go audio) to adjust the Squelch.
>> Is there a solution to bring them together?
>>
>> The SQL is not adjustable - JP1 ON or OFF gives no solution.
>>
>>
>>
>> Thank you
>>
>> Kurt
>>
>> OE1KBC
>>
>>
>>
>> -------------- next part -------------- An HTML attachment was
>> scrubbed...
>> URL:
>> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121014/e0b1
>> 7c64/at
>> tachment-0001.html>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Mon, 15 Oct 2012 10:03:11 -0400
>> From: Jon Rorke <jrorke at cogeco.ca>
>> Cc: app_rpt-users at ohnosec.org
>> Subject: Re: [App_rpt-users] Alternate IAX port >> bind port not
>> working - the fix
>> Message-ID: <507C179F.3050307 at cogeco.ca>
>> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
>>
>> OK I now have it working for me.
>> The bindport in IAX.conf needed to be changed to 4570 and then server
>> info on the Allstar portal also needed to be changed.
>>
>> Thanks to Brian for the missing piece of info. The last time I had to
>> do this was when there was no portal config.
>>
>> Jon VA3RQ
>>
>> > have you changed the port you use AT the portal? ie the server
>> > configuration, network configuration tab?
>> >
>> > if you have a node that needs to be on a different port, the
>> > underlying server needs to be moved both at the end, as well as at
>> > the mother ship.
>> >
>> > had the same problem until i had everything lined up.
>> >
>> > --
>> > Bryan
>> > Sent from my iPhone 5
>> > please forgive misspellings...
>>
>>
>>
>> On 10/12/2012 11:31 AM, George Csahanin wrote:
>> > On my node 28599 here's where I had to make mods to reflect using
>> > port
>> > 4570:
>> > root at nat:/etc/asterisk <mailto:root at nat:/etc/asterisk># grep 4570 *
>> > iax.conf:bindport=4570
>> > iax_rpt_custom.conf:bindport=4570
>> > root at nat:/etc/asterisk <mailto:root at nat:/etc/asterisk># There are
>> > no ports indicated in rpt.conf.
>> > It all works fine, others can connect, and webtransceiver works fine.
>> > I also do not use portal configuration as it won't let me ser CW ID
>> > at
>> > 30 WPM
>> > GeorgeC
>> >
>> > ----- Original Message -----
>> > *From:* Robert Poff <mailto:wb3awj at comcast.net>
>> > *To:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
>> > *Sent:* Friday, October 12, 2012 8:32 AM
>> > *Subject:* Re: [App_rpt-users] Alternate IAX port >> bind port not
>> > working
>> >
>> > Just for drill... if you move into /etc/asterisk and do "fgrep
>> > 4569 *" and "fgrep 4570 *".
>> > What do get back?
>> >
>> > Here's what I see with my alternate port 4565 (on XIPAR) :
>> > iax_general_custom.conf:bindport=4565
>> > rpt.conf:28695 = radio at 127.0.0.1
>> > <mailto:radio at 127.0.0.1>:4565/28695,NONE ;KVHF 10m
>> > Receiver - ME
>> > rpt.conf:12958 = radio at 209.213.169.196
>> > <mailto:radio at 209.213.169.196>:4565/12958,NONE ;KVHF 10m
>> > Transmitter
>> >
>> > --
>> > /Robert A. Poff/
>> > /Loganville, PA/
>> >
>> > */S/V Loon <http://wb3awj.hobby-site.org/loon.htm>/*
>> > /1983 Hunter 34/
>> > /Havre de Grace, MD./
>> >
>> > WB3AWJ/- Allstar 27784/
>> > /Powered by Linux/
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > App_rpt-users mailing list
>> > App_rpt-users at ohnosec.org
>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> -------------- next part -------------- An HTML attachment was
>> scrubbed...
>> URL:
>> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121015/da09
>> 2329/at
>> tachment-0001.html>
>>
>> ------------------------------
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>> End of App_rpt-users Digest, Vol 44, Issue 31
>> *********************************************
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL:
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121017/8ff2a
> 6ed/attachment.html>
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 44, Issue 32
> *********************************************
------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 44, Issue 33
*********************************************
More information about the App_rpt-users
mailing list