[App_rpt-users] Fwd: Dtmf pass through

[Ian Venable]

I am banging my head against the wall, this has me stumped. I have googled
this idea every which way, and everyone says dtmf_propagate=yes, well I did
that, I did that on every node I have, I have to be missing something. I
have also tried *4 remote cmd mode, and then send the dtmf, and # to end
the remote cmd mode, but that doesn't seem to work either.

Ian
Ki6ies

On Mon, Oct 29, 2012 at 7:16 PM, Chris(KB2FAF) <kb2faf at arrl.net> wrote:

>  FYI,
>
> I have the same problem and have tried everything indicated below with no
> luck.  It can't be this complicated can it?
>
> Chris
> KB2FAF
>
>
>
>
>
> On 10/29/2012 04:19 PM, Ian Venable wrote:
>
> So I still am having trouble with this. So far I have added
> propagate_dtmf=yes
> linktolink=yes
> inxlat=#56,#57,0123456789ABCD
> outxlat=#56,#57,0123456789ABCD
> to the rpt.conf file on the node that has the cat200b controller attached
> to it. Also on both of my other nodes that are connected via the allstar
> system i have added
> propagate_dtmf=yes
> to there rpt.conf files. I have done a restart on all the nodes, and still
> not getting the dtmf to pass through. When the dtmf passes through you
> should be able to hear it on the output of the repeaters, right? As long as
> it is not started with a (*) then the node would try to act on the dtmf.
> The cat200b controller is in remote base weather mode, and does not require
> COR, or PL to act, all it is looking at is the Tx audio from the usb fob,
> which goes into the Rx port on the controller. So all the controller needs
> to hear is the DTMF audio, but its not getting there. The controllers Tx
> audio is connected to the Rx audio on the usb fob, and I know thats working
> because I hear the controller identify itself with its version when I power
> cycle it. I am probably doing something wrong, so hopefully someone could
> point me in the right direction. Thanks!
>
> Ian Ki6ies
>
>
>  On Sun, Oct 28, 2012 at 5:42 PM, Ken <ke2n at cs.com> wrote:
>
>>  *4 sends “telemetry” (control codes) to the other node … not DTMF
>>
>>
>>
>> I think you want
>>
>>
>>
>> propagate_dtmf=yes
>>
>>
>>
>> in the node stanza
>>
>>
>>
>> Ken
>>
>>
>>
>> *From:* app_rpt-users-bounces at ohnosec.org [mailto:
>> app_rpt-users-bounces at ohnosec.org] *On Behalf Of *ki6ies.tasma at gmail.com
>> *Sent:* Sunday, October 28, 2012 5:31 PM
>> *To:* app_rpt-users at ohnosec.org
>> *Subject:* [App_rpt-users] Fwd: Dtmf pass through
>>
>>
>>
>>
>>
>> -------- Original Message --------
>> Subject: Dtmf pass through
>> From: ki6ies.tasma at gmail.com
>> To: app_rpt-users-request at ohnosec.org
>> CC:
>>
>> Hello all! I need some help. I am trying to control a cat200 repeater
>> controller via dtmf. It is its own node. I have my other node (uhf
>> repeater)connected to it, from which i would like to send the commands
>> from. I have tried the *4 and the node number. And then i hear "By your
>> command". But dtmf is not making it to the controller. It is making it to
>> the other node, because I can issue it commands. It is just not passing
>> through the other node, which i would like for it to do. Any thoughts?
>>
>>
>>
>> Ian
>>
>>
>>
>> *Sent from my Verizon Wireless 4G LTE DROID*
>>
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20121029/4d3c24f5/attachment.html>