[App_rpt-users] Remote Base Memory RX CTCSS

[Jeffrey S. Carrier]

What are you using for a remote base?  What type of interface?  I've
been trying a G707 with mixed results.

 K0JSC

-----Original Message-----
From: Tim Sawyer [mailto:tim.sawyer at me.com] 
Sent: Wednesday, September 19, 2012 10:12 PM
To: Fredric Moses; Lee Dusbabek
Cc: app_rpt-users at ohnosec.org list
Subject: Re: [App_rpt-users] Remote Base Memory RX CTCSS

Thank you!
--
Tim
:wq

On Sep 19, 2012, at 8:06 PM, Fredric Moses <fred at moses.bz> wrote:

> 26 = 147.260,100.0,ltr+
> 
> TX/RX pl, low power and + offset..
> 
> 
> --
> Fredric Moses - W8FSM - WQOG498
> fred at moses.bz
> 
> 
> 
> 
> On Sep 19, 2012, at 10:55 PM, Tim Sawyer <tim.sawyer at me.com> wrote:
> 
>> How is a remote base memory channel programed with P/L decode? For
example with this memory:
>> [memory]
>> 09 = 146.895,136.5,l-t	
>> --
>> Tim
>> :wq
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users