September 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Sep 1 01:58:10 UTC 2012
Ending: Sat Sep 29 18:15:25 UTC 2012
Messages: 162

• [App_rpt-users] URI<>TKR-750 cable   Ramesh Dhami (VA3UV)
• [App_rpt-users] Configuration of multiple nodes   Ramesh Dhami (VA3UV)
• [App_rpt-users] RTCM   Alan Adamson
• [App_rpt-users] MDC1200 Access Control To Repeater   Chris Andrist
• [App_rpt-users] EchoLink and the CLI   Bob at w5evh.org
• [App_rpt-users] additionally   Bryan D. Boyle
• [App_rpt-users] not registered on allstarlink?   Bryan D. Boyle
• [App_rpt-users] my bad....Re: additionally   Bryan D. Boyle
• [App_rpt-users] Autopatch (inbound) question...   Bryan D. Boyle
• [App_rpt-users] TX Tone Drop out Time   Bryan D. Boyle
• [App_rpt-users] changing IAX port   Bryan D. Boyle
• [App_rpt-users] changing IAX port   Bryan D. Boyle
• [App_rpt-users] changing IAX port   Bryan D. Boyle
• [App_rpt-users] ok...   Bryan D. Boyle
• [App_rpt-users] ok...   Bryan D. Boyle
• [App_rpt-users] Code cleanup   Buddy Brannan
• [App_rpt-users] What is wrong with my node?   Jeffrey S. Carrier
• [App_rpt-users] What is wrong with my node?   Jeffrey S. Carrier
• [App_rpt-users] What is wrong with my node?   Jeffrey S. Carrier
• [App_rpt-users] Remote help   Jeffrey S. Carrier
• [App_rpt-users] Remote command?   Jeffrey S. Carrier
• [App_rpt-users] Remote command?   Jeffrey S. Carrier
• [App_rpt-users] Remote command?   Jeffrey S. Carrier
• [App_rpt-users] App_rpt Yet another MDC question Doh!   Jeffrey S. Carrier
• [App_rpt-users] Remote Base Memory RX CTCSS   Jeffrey S. Carrier
• [App_rpt-users] Remote Base Memory RX CTCSS   Jeffrey S. Carrier
• [App_rpt-users] ok...   Jeffrey S. Carrier
• [App_rpt-users] Laptop Settings   Jeffrey S. Carrier
• [App_rpt-users] RTCM   Jeffrey S. Carrier
• [App_rpt-users] RTCM   Jeffrey S. Carrier
• [App_rpt-users] RTCM   Jeffrey S. Carrier
• [App_rpt-users] RTCM   Jeffrey S. Carrier
• [App_rpt-users] Echolink setup   George Csahanin
• [App_rpt-users] What is wrong with my node?   George Csahanin
• [App_rpt-users] What is wrong with my node?   George Csahanin
• [App_rpt-users] pickle problem after upgrade   George Csahanin
• [App_rpt-users] pickle problem after upgrade   George Csahanin
• [App_rpt-users] TX Tone Drop out Time   George Csahanin
• [App_rpt-users] TX Tone Drop out Time   Corey Dean
• [App_rpt-users] changing IAX port   Corey Dean
• [App_rpt-users] Code cleanup   Corey Dean
• [App_rpt-users] Echolink setup   Jim Duuuude
• [App_rpt-users] CLI Echolink Call Sign Logging   Jim Duuuude
• [App_rpt-users] Megan   Jim Duuuude
• [App_rpt-users] connection/registration problems??   Jim Duuuude
• [App_rpt-users] Remote command?   Jim Duuuude
• [App_rpt-users] compile and install app_rpt from source?   Jim Duuuude
• [App_rpt-users] ACID not starting Asterisk   Jim Duuuude
• [App_rpt-users] RTCM   Jim Duuuude
• [App_rpt-users] Loop prevention?   Jim Duuuude
• [App_rpt-users] Code cleanup   Jim Duuuude
• [App_rpt-users] RTCM   Jim Duuuude
• [App_rpt-users] ACID not starting Asterisk   Jim Duuuude
• [App_rpt-users] Any one know what this means when i try to reload my iax.conf   Jim Duuuude
• [App_rpt-users] RTCM   Jim Duuuude
• [App_rpt-users] Code cleanup   Jim Duuuude
• [App_rpt-users] Code cleanup   Jim Duuuude
• [App_rpt-users] Setup info   Jim Duuuude
• [App_rpt-users] 2 times simplex nodes   Jim Duuuude
• [App_rpt-users] Changing RTCM user from Comcast to Verizon   Fran
• [App_rpt-users] RTCM direct conn to repeater???   Fran
• [App_rpt-users] Same Old Problem With Node   Steve Gladden
• [App_rpt-users] Same Old Problem With Node   Steve Gladden
• [App_rpt-users] Monitoring an allstar node?   Michael Graff
• [App_rpt-users] Monitoring an allstar node?   Michael Graff
• [App_rpt-users] Monitoring an allstar node?   Michael Graff
• [App_rpt-users] Loop prevention?   Michael Graff
• [App_rpt-users] Code cleanup   Michael Graff
• [App_rpt-users] Setup info   Ryan Gross
• [App_rpt-users] Using the URI for station control   Eric Guth
• [App_rpt-users] duplex=3   Bradley Haney
• [App_rpt-users] node registration problems   Bradley Haney
• [App_rpt-users] Any one know what this means when i try to reload my iax.conf   Bradley Haney
• [App_rpt-users] Installing aprx on ACID   Michael Hebert
• [App_rpt-users] Laptop Settings   Michael Hebert
• [App_rpt-users] Adding more short cuts and more   Chuck Henderson
• [App_rpt-users] CLI Echolink Call Sign Logging   Chuck Henderson
• [App_rpt-users] Same Old Problem With Node   Chuck Henderson
• [App_rpt-users] transmit hangs on reboot   Chuck Henderson
• [App_rpt-users] How do you restart Asterisk?   Chuck Henderson
• [App_rpt-users] ACID not starting Asterisk   Mark Huelskoetter
• [App_rpt-users] limey and parallel port   KB7RSI
• [App_rpt-users] limey and parallel port   KB7RSI
• [App_rpt-users] Using MDC1200 as Telemetry?   Tony KT9AC
• [App_rpt-users] Remote command?   Tony KT9AC
• [App_rpt-users] Adding more short cuts and more   Keith
• [App_rpt-users] Remote help   Keith
• [App_rpt-users] App_rpt-users Digest, Vol 43, Issue 15   Keith
• [App_rpt-users] Help please   Keith
• [App_rpt-users] Adding more short cuts and more   Ken
• [App_rpt-users] EchoLink and the CLI   Ken
• [App_rpt-users] Slow green led flashing on uri?   Ken
• [App_rpt-users] TX Tone Drop out Time   Ken
• [App_rpt-users] TX Tone Drop out Time   Ken
• [App_rpt-users] changing IAX port   Ken
• [App_rpt-users] ok...   Ken
• [App_rpt-users] oh   Ken
• [App_rpt-users] compile and install app_rpt from source?   Ken
• [App_rpt-users] ACID not starting Asterisk   Ken
• [App_rpt-users] transmit hangs on reboot   Stephen Liggett
• [App_rpt-users] ACID not starting Asterisk   Stephen Liggett
• [App_rpt-users] ACID not starting Asterisk   Stephen Liggett
• [App_rpt-users] ACID not starting Asterisk   Stephen Liggett
• [App_rpt-users] Using MDC1200 as Telemetry?   Pyrodox Lion
• [App_rpt-users] URI frustration   David McGough
• [App_rpt-users] RTCM direct conn to repeater???   Monty
• [App_rpt-users] Remote Base Memory RX CTCSS   Fredric Moses
• [App_rpt-users] CLI Echolink Call Sign Logging   Kent Ochs
• [App_rpt-users] CLI Echolink Call Sign Logging   Kent Ochs
• [App_rpt-users] CLI Echolink Call Sign Logging   Kent Ochs
• [App_rpt-users] compile and install app_rpt from source?   Kevin Oleniczak
• [App_rpt-users] Slow green led flashing on uri?   Anthony Percy
• [App_rpt-users] Slow green led flashing on uri?   Anthony Percy
• [App_rpt-users] URI frustration   Anthony Percy
• [App_rpt-users] URI frustration   Anthony Percy
• [App_rpt-users] URI frustration   Anthony Percy
• [App_rpt-users] Configuration of multiple nodes   Matthew Pitts
• [App_rpt-users] Remote Base Memory RX CTCSS   Matt Roberts
• [App_rpt-users] Remote Base Memory RX CTCSS   Matt Roberts
• [App_rpt-users] How do you restart Asterisk?   Matt Roberts
• [App_rpt-users] EchoLink and the CLI   Bob Roszkowski
• [App_rpt-users] limey and parallel port   Tim Sawyer
• [App_rpt-users] limey and parallel port   Tim Sawyer
• [App_rpt-users] limey and parallel port   Tim Sawyer
• [App_rpt-users] limey and parallel port   Tim Sawyer
• [App_rpt-users] limey and parallel port   Tim Sawyer
• [App_rpt-users] transmit hangs on reboot   Tim Sawyer
• [App_rpt-users] Why an I getting This Response?   Tim Sawyer
• [App_rpt-users] Remote Base Memory RX CTCSS   Tim Sawyer
• [App_rpt-users] Remote Base Memory RX CTCSS   Tim Sawyer
• [App_rpt-users] Remote Base Memory RX CTCSS   Tim Sawyer
• [App_rpt-users] What is wrong with my node?   S. Scott
• [App_rpt-users] What is wrong with my node?   S. Scott
• [App_rpt-users] What is wrong with my node?   S. Scott
• [App_rpt-users] Code cleanup   S. Scott
• [App_rpt-users] Megan   Edward talaro Talaro
• [App_rpt-users] URI<>TKR-750 cable   Jay Urish
• [App_rpt-users] URI frustration   Jay Urish
• [App_rpt-users] URI frustration   Jay Urish
• [App_rpt-users] What is wrong with my node?   Jim W7RY
• [App_rpt-users] What is wrong with my node?   Jim W7RY
• [App_rpt-users] What is wrong with my node?   Jim W7RY
• [App_rpt-users] Same Old Problem With Node   Jim W7RY
• [App_rpt-users] Same Old Problem With Node   Jim W7RY
• [App_rpt-users] Same Old Problem With Node   Jim W7RY
• [App_rpt-users] Same Old Problem With Node   Jim W7RY
• [App_rpt-users] Same Old Problem With Node   Jim W7RY
• [App_rpt-users] Same Old Problem With Node   Jim W7RY
• [App_rpt-users] TX Tone Drop out Time   Jim W7RY
• [App_rpt-users] Chicken Burst Broken   Jim W7RY
• [App_rpt-users] Why an I getting This Response?   Jim W7RY
• [App_rpt-users] How do you restart Asterisk?   Jim W7RY
• [App_rpt-users] Laptop Settings   Jim W7RY
• [App_rpt-users] Aprs beacon rate   Scott Weis
• [App_rpt-users] ACID not starting Asterisk   Scott Weis
• [App_rpt-users] CLI Echolink Call Sign Logging   Keith Williamson
• [App_rpt-users] 2 times simplex nodes   Ian Wilson
• [App_rpt-users] TX Tone Drop out Time   Mike Wolthuis
• [App_rpt-users] TX Tone Drop out Time   Mike Wolthuis
• [App_rpt-users] App_rpt   K&R Yoksh
• [App_rpt-users] Aprs beacon rate   ki6ies.tasma at gmail.com
• [App_rpt-users] Aprs beacon rate   ki6ies.tasma at gmail.com

Last message date: Sat Sep 29 18:15:25 UTC 2012
Archived on: Tue Oct 15 06:53:42 UTC 2019

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...