[App_rpt-users] Remote Base Memory RX CTCSS

[Tim Sawyer]

We use Motorola Syntor with an Xcat. It works quite well. More Xcat info at http://www.wd6awp.org/xcat/index.html. There's a Yahoo! group too.

Here's our node stanza....

[1001]
rxchannel = Simpleusb/usb		; Rx audio/signalling channel
remote = xcat
civaddr = 32
functions = functions-remote
lconn = PP3=1
ldisc = PP3=0
memory = memory				; Section to hold memory entries (optional)
					; remote=ft897 for Yaesu FT-897 or
					; remote=rbi for Doug Hall RBI1
					; remote=kenwood for Kenwood mobiles such as the TMG707A
					; remote=ic706 for the Icom IC-706
ioport = /dev/ttyS0			; Specify port for serial port (optional)
iospeed = 19200
dusbabek = yes

;iobase = 0x378				; Specify IO port for parallel port (optional)
authlevel = 2				; Remote base authentication level
;; authlevel = 0 : Anyone can use it
;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it
;; authlevel = 2 : Requires log in, asks for it automously
;mars = 0                   ; set=1 for IC-706 w/MARS mods (optional)

remote_inact_timeout=1800 	            ; Inactivity timer for remote base nodes only (set to 0 to disable).
remote_timeout=5400                 ; Session time out for remote base. (set to 0 to disable)
;remote_timeout=120                 ; Session time out for remote base. (set to 0 to disable)
;remote_timeout_warning=30


--
Tim
:wq

On Sep 20, 2012, at 12:46 AM, Matt Roberts <n9gmr at me.com> wrote:

> Add "R"to the end of the memory channel definition.
> 
> Matt Roberts
> n9gmr at me.com
> 
> Sent from my iPhone
> 
> On Sep 19, 2012, at 10:55 PM, Tim Sawyer <tim.sawyer at me.com> wrote:
> 
>> How is a remote base memory channel programed with P/L decode? For example with this memory:
>> [memory]
>> 09 = 146.895,136.5,l-t    
>> --
>> Tim
>> :wq
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120920/8e3ea1e7/attachment.html>