[App_rpt-users] Remote Base Memory RX CTCSS

[Matt Roberts]

I think what you're seeing is a bug in the system. I've seen that behavior on every repeater on AllStar, including mine.

Matt Roberts
n9gmr at me.com

Sent from my iPhone

On Sep 20, 2012, at 10:31 AM, "Jeffrey S. Carrier" <jeff.carrier at rmsmsecurity.com> wrote:

> I might have to look at that though the G707 seemed like a better option IF I could make it work reliably. 
>  
> How do your ID’s work?  I have a voice ID and the CWID set as the talkover.  I’ve changed the polite id time from 3 to 300000 and everywhere in between.  What I’m regularly seeing is the while someone is transmitting I hear the CWID first then the voice id follows.  Is it something with the polite id timing?
>  
>  K0JSC
> From: Tim Sawyer [mailto:tim.sawyer at me.com] 
> Sent: Thursday, September 20, 2012 7:38 AM
> To: Matt Roberts
> Cc: app_rpt-users at ohnosec.org list
> Subject: Re: [App_rpt-users] Remote Base Memory RX CTCSS
>  
> We use Motorola Syntor with an Xcat. It works quite well. More Xcat info at http://www.wd6awp.org/xcat/index.html. There's a Yahoo! group too.
>  
> Here's our node stanza....
>  
> [1001]
> rxchannel = Simpleusb/usb         ; Rx audio/signalling channel
> remote = xcat
> civaddr = 32
> functions = functions-remote
> lconn = PP3=1
> ldisc = PP3=0
> memory = memory                   ; Section to hold memory entries (optional)
>                         ; remote=ft897 for Yaesu FT-897 or
>                         ; remote=rbi for Doug Hall RBI1
>                         ; remote=kenwood for Kenwood mobiles such as the TMG707A
>                         ; remote=ic706 for the Icom IC-706
> ioport = /dev/ttyS0          ; Specify port for serial port (optional)
> iospeed = 19200
> dusbabek = yes
> 
> ;iobase = 0x378                   ; Specify IO port for parallel port (optional)
> authlevel = 2                ; Remote base authentication level
> ;; authlevel = 0 : Anyone can use it
> ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it
> ;; authlevel = 2 : Requires log in, asks for it automously
> ;mars = 0                   ; set=1 for IC-706 w/MARS mods (optional)
> 
> remote_inact_timeout=1800                ; Inactivity timer for remote base nodes only (set to 0 to disable).
> remote_timeout=5400                 ; Session time out for remote base. (set to 0 to disable)
> ;remote_timeout=120                 ; Session time out for remote base. (set to 0 to disable)
> ;remote_timeout_warning=30
> 
> 
> --
> Tim
> :wq
>  
> On Sep 20, 2012, at 12:46 AM, Matt Roberts <n9gmr at me.com> wrote:
> 
> 
> Add "R"to the end of the memory channel definition.
> 
> Matt Roberts
> n9gmr at me.com
> 
> Sent from my iPhone
> 
> On Sep 19, 2012, at 10:55 PM, Tim Sawyer <tim.sawyer at me.com> wrote:
> 
> 
> How is a remote base memory channel programed with P/L decode? For example with this memory:
> [memory]
> 09 = 146.895,136.5,l-t    
> --
> Tim
> :wq
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120920/78fe09e7/attachment.html>