[App_rpt-users] changing IAX port

[Corey Dean]

It is listed under the server / network configuration.  If you do not change it there, no one will be able to connect to you because it will be trying to connect to the wrong port.

Corey  N3FE

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bryan D. Boyle
Sent: Friday, September 21, 2012 7:10 AM
To: Ken
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] changing IAX port

i was looking up on allstarlink for where to plug in the port number on jims's side, but didn't see anywhere to specify it.  everything works from my side...got the router and firewall set up right, etc...just missing that one ifinal piece of the puzzle. 


thanx.

--
Bryan
Sent from my iPhone
please forgive misspellings...



On Sep 21, 2012, at 4:42, "Ken" <ke2n at cs.com> wrote:

> The node:port format is for the bindaddr= command, of course.  For 
> bindport= you just put in the port number.
> 
> Ken
> 
> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org 
> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Ken
> Sent: Friday, September 21, 2012 4:40 AM
> To: 'Bryan D. Boyle'; 'app_rpt mailing list'
> Subject: Re: [App_rpt-users] changing IAX port
> 
> Brian
> It's in iax.conf
> 
> You can use the keyword "bindport=" or you can add the port to the 
> number in "bindaddr=" (node:port)
> 
> This port number needs to be in your router too and in the 
> registration server (use the portal to specify the port you selected)
> 
> Also, if you have any non-registering nodes in that system, the port 
> number needs to be explicitly used in identifying those nodes to the other system.
> 
> 73
> 
> Ken
> 
> 
>> -----Original Message-----
>> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users- 
>> bounces at ohnosec.org] On Behalf Of Bryan D. Boyle
>> Sent: Thursday, September 20, 2012 10:17 PM
>> To: app_rpt mailing list
>> Subject: [App_rpt-users] changing IAX port
>> 
>> I'm installing a second computer here to drive Yet More RF out of the
> House
>> of RF here...and since I'm doing so...wondering where on the mother 
>> ship
> do
>> you change the port that IAX is configured for.
>> 
>> I think I see where, in the config files, you change it...but, 
>> obviously,
> the
>> head end has to know where the handshake is supposed to go.
>> 
>> Am I missing something?  Not that that would be out of character
> (according
>> to my bride...), but...just thought I'd ask.
>> 
>> Tnx
>> 
>> Bryan WB0YLE
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

--
This message was scanned and is believed to be clean.
Click here to report this message as spam. 
http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=A6B142227.A8740