[App_rpt-users] ok...

[Ken]

you just have to wait 15-30 minutes after restarting *either* of the systems

you can avoid the wait by putting the explicit address (IP:port) in each other node's [nodes] stanza.

Asterisk checks the [nodes] list before going to the registration server ... this is just like if you had some internal or non-registering nodes (numbers less than 2000, for example) except you include the port number.

Ken



-----Original Message-----
From: Bryan D. Boyle <bdboyle at bdboyle.com>
To: app_rpt mailing list <app_rpt-users at ohnosec.org>
Sent: Fri, Sep 21, 2012 1:19 pm
Subject: [App_rpt-users] ok...


so...got it registered...and can connect between node connected on one
nternal server on iax port 4570 to another on iax port 4569...it shows
p in the node list on the mother ship...
However...using the cli command 'rpt fun node dtmf-function' between
hem...nada.
do I have to specify somewhere the proper ports at IP (ie 192.168.1.98:4569
nd vice versa) to get commands to pass between the servers?
Sorry for what may seem bloody obvious...
BB
______________________________________________
pp_rpt-users mailing list
pp_rpt-users at ohnosec.org
ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120921/547e9eb9/attachment.html>