[App_rpt-users] RTCM

[Jeffrey S. Carrier]

Not sure on the firmware but the SVN should be up to date.  I'll check
the FW.

 

 

________________________________

From: Jim Duuuude [mailto:telesistant at hotmail.com] 
Sent: Monday, September 24, 2012 2:18 PM
To: Jeffrey S. Carrier; app_rpt mailing list
Subject: RE: [App_rpt-users] RTCM

 

are you using the latest firmware and app_rpt sources from SVN?

> Date: Mon, 24 Sep 2012 13:41:07 -0600
> From: jeff.carrier at rmsmsecurity.com
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] RTCM
> 
> Can anyone provide any guidance on this issue?
> 
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> 
> I've changed the buflen parameter and still no joy. Ping times are no
> more than 150 ms between the server and rtcm.
> 
> Thanks K0JSC
> 
> 
> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org
> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Ramesh Dhami
> (VA3UV)
> Sent: Saturday, September 22, 2012 9:17 PM
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Configuration of multiple nodes
> 
> On 22/09/2012 10:50 PM, Matthew Pitts wrote:
> > Good evening,
> >
> > I will be using the ACID installation cd to set up my first
permanent
> AllStar Link server and am wondering how to configure the system so
that
> the hub node and its three branch nodes come up connected from the
> beginning. I have been running a single node in a virtual machine off
> and on for about a month now and uave most of the parts ready to do
the
> live system. Feel free to give suggestions; I'm willing to learn the
> best way to do things, even though I've been around Linux almost 18
> years.
> >
> 
> <-- In the node stanza in rpt.conf add the following:
> 
> startup_macro=*5100
> 
> 
> Then edit or create a new [macro] stanza - example:
> 
> [macro]
> 100 = *912329#
> 
> 
> In this example, the node @ start-up will call macross 100; macro 100 
> creates a permanent link to node 2329. Since you want to link to 3 
> branch nodes, you can add multiple nodes in the macro - e.g:
> 
> 100 = *912329*911200*911300#
> 
> 
> HTH.
> 
> Cheers,
> 
> Ramesh.
> www.freestar.us
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120924/44d78d1a/attachment.html>