[App_rpt-users] Frequency Agile Remote - XCAT FUBAR
Robert Poff
wb3awj at comcast.net
Fri Aug 2 03:38:40 UTC 2013
Tim,
Below are the pertinent lines from the rpt.conf.
As to the CIV.....
As we sit now, if I send a *017 command (supposed to load 146.520
simplex), the debug output says this:
String output was �� �'Ms:
FE FE 20 E0 08 01 FD
Which from what I find online says that function 08 is set memory mode.
I think, the string should be : FE FE 20 E0 05 00 00 52 06 14 FD .
Function 05 being set frequency with acknowledgment.
Or possibly FE FE 20 E0 00 00 0 052 06 14 FD . Function 00 be set
frequency without acknowledgment.
To prove this out, I'll make a file with only those values in it with a
hex editor, and blow it out ttyS0 to the xcat and see what happens.
I'll anxiously await to see if anything is wrong.
functions = functions-remote
phone_functions = functions-remote
lconn = PP3=1 ; Turn ON Fan
ldisc = PP3=0 ; Turn OFF Fan
memory = memory ; Section to hold memory entries (optional)
remote = xcat ; Radio Command format
; remote=ft897 for Yaesu FT-897 or
; remote=rbi for Doug Hall RBI1
; remote=kenwood for Kenwood mobiles such as the
TMG707A
; remote=ic706 for the Icom IC-706
; remote=xcat for Syntor X with XCAT board
civaddr = 32 ; CI-V address in DECIMAL
ioport = /dev/ttyS0 ; Specify port for serial port (optional)
iospeed = 19200 ; COMM port speed
dusbabek = yes ; either you need it or you don't
authlevel = 0 ; Remote base authentication level
; authlevel = 0 : Anyone can use it
; authlevel = 1 : Requires log in, Waits for Tx key to
ask for it
; authlevel = 2 : Requires log in, asks for it automously
;mars = 1 ; set=1 for IC-706 w/MARS mods (optional)
;
remote_inact_timeout=0 ; Inactivity timer for remote base nodes only
(set to 0 to disable).
remote_timeout=5400 ; Session time out for remote base. (set to 0 to
disable)
split2m = 600 ; Set the default tx split to 600 KC
[functions-remote]
0=remote,1 ; Retrieve Memory
1=remote,2 ; Set freq. example :
*1146*520*1 for 146.520 (-) Split
;
*1146*970*2 for 146.970 ( ) Simplex
;
*1147*330*3 for 147.330 (+) Split
2=remote,3 ; Set tx PL tone
3=remote,4 ; Set rx PL tone
5=macro,1 ; Call MACROS
40=remote,100 ; Rx PL off
41=remote,101 ; Rx PL on
42=remote,102 ; Tx PL off
43=remote,103 ; Tx PL on
44=remote,104 ; Low Power
45=remote,105 ; Medium Power
46=remote,106 ; High Power
711=remote,107 ; Bump -20
714=remote,108 ; Bump -100
717=remote,109 ; Bump -500
713=remote,110 ; Bump +20
716=remote,111 ; Bump +100
719=remote,112 ; Bump +500
721=remote,113 ; Scan - slow
724=remote,114 ; Scan - quick
727=remote,115 ; Scan - fast
723=remote,116 ; Scan + slow
726=remote,117 ; Scan + quick
729=remote,118 ; Scan + fast
79=remote,119 ; Tune (brief AM transmission
for automatic antenna tuner)
61=remote,5 ; Long status query
62=remote,140 ; Short status query
67=remote,210 ; Send a *
69=remote,211 ; Send a #
91=remote,99,CALLSIGN,LICENSETAG ; Remote base login.
[memory]
; Memories for remote bases
;Syntax : CC=RRR.RRR,PPP.P,AAAAA
; C=Channel Number
; R=RX Frequency
; P=PL Frequency
; A=Attributes
;
;Attributes : a=AM b=LSB f=FM u=USB
; l=Low Power m=Medium Power h=High Power
; -=Minus TX Offset s=Simplex +=Plus TX Offset
; t=TX PL on r=RX PL on
;
init=145.670,123.0,shrt ;Set to this on startup
00=145.510,123.0,sht ;Simplex, High Power, PL Encode
01=145.530,123.0,sht ;Simplex, High Power, PL Encode
02=145.550,123.0,sht ;Simplex, High Power, PL Encode
03=145.570,123.0,sht ;Simplex, High Power, PL Encode
<SNIP>
17=146.520,123.0,sht ;National Simplex/Calling
<SNIP>
--
Robert A. Poff
Loganville, PA
S/V Loon
1983 Hunter 34
Havre de Grace, MD.
WB3AWJ - Allstar 27784
Powered by Linux
On Thu, 2013-08-01 at 15:46 -0700, Tim Sawyer wrote:
> Maybe you have something wrong with your remote [functions] stanza.
> Let's see that that looks like on your system.
>
> --
> Tim
> :wq
>
>
>
> On Aug 1, 2013, at 3:19 PM, Robert A. Poff WB3AWJ <wb3awj at comcast.net>
> wrote:
>
>
>
> > Still digging on my Agile Remote.
> >
> > Acid with a Syntor X and XCAT.
> > When I try to set a frequency, it's sending the CIV string to
> > retrieve a memory from the radio.
> > Not the string needed to set it from one of the memory entries in
> > rpt.conf.
> >
> > Running Asterisk in the foreground with all the debug turned up
> > here's what I see on the console executing a *017 command :
> >
> > @@@@ action: remote, param = 1
> > @@@@ table index i = 5
> > [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:17558 function_remote:
> > 28260 param=1 digitbuf=17 source=2
> > [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:17483 get_mem_set:
> > digitbuf=17
> > [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:4225 retrieve_memory:
> > memory=17 block=memory
> > [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry:
> > Tracepoint rpt_telemetry() entered mode=38
> > [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry:
> > Tracepoint rpt_telemetry() exit
> > [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:17486 get_mem_set:
> > freq=146.520 res=0
> > [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:12849
> > collect_function_digits: rv=3
> > [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry:
> > Tracepoint rpt_telemetry() entered mode=3
> > [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry:
> > Tracepoint rpt_telemetry() exit
> > Mode
> > [Aug 1 15:06:09] NOTICE[2731]: app_rpt.c:13870 serial_remote_io:
> > ioport=/dev/ttyS0 baud=14 iofd=0x19
> > String output was �� �'Ms:
> > FE FE 20 E0 08 01 FD
> > [Aug 1 15:06:09] NOTICE[2732]: app_rpt.c:8420 wait_interval: Delay
> > interval = 2000
> > [Aug 1 15:06:10] WARNING[2731]: app_rpt.c:13910 serial_remote_io:
> > -99999 Serial device not responding on node 28260
> > Offset Initial/Simplex
> > Frequency
> > Offset
> > CTCSS
> > Frequency
> > [Aug 1 15:06:10] NOTICE[2731]: app_rpt.c:8420 wait_interval: Delay
> > interval = 2000
> > [Aug 1 15:06:11] NOTICE[2732]: app_rpt.c:8424 wait_interval: Delay
> > complete
> > -- Hungup 'Zap/pseudo-1521668112'
> > [Aug 1 15:06:12] NOTICE[2731]: app_rpt.c:8424 wait_interval: Delay
> > complete
> > -- <Zap/pseudo-1162233705> Playing 'rpt/invalid-freq' (language
> > 'en')
> >
> > At one point I added a statement to printf myrpt->remoterig variable
> > in the check_freq function.
> > It returned "myrpt->remoterig=Mode" ?????
> > Shouldn't that be "xcat", or "remote_rig_xcat" ?
> >
> > Any suggestions where I should be looking?
> >
> >
> >
> >
> > Robert A. Poff
> > Loganville, PA.
> >
> >
> > "Lieutenant, target the offending power boat and launch photon
> > torpedoes"
> >
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130801/115a20fd/attachment.html>
More information about the App_rpt-users
mailing list