[App_rpt-users] Frequency Agile Remote - XCAT FUBAR

[Robert A. Poff]

The same rpt.conf file worked perfectly before I updated to current svn version.

I'll post it later this evening when we get home.


Tim Sawyer <tim.sawyer at me.com> wrote:
>Maybe you have something wrong with your remote [functions] stanza.
>Let's see that that looks like on your system.
>--
>Tim
>:wq
>
>On Aug 1, 2013, at 3:19 PM, Robert A. Poff WB3AWJ <wb3awj at comcast.net>
>wrote:
>
>> Still digging on my Agile Remote.
>> 
>> Acid with a Syntor X and XCAT.
>> When I try to set a frequency, it's sending the CIV string to
>retrieve a memory from the radio.
>> Not the string needed to set  it from one of the memory entries in
>rpt.conf.
>> 
>> Running Asterisk in the foreground with all the debug turned up
>here's what I see on the console executing a *017 command :
>> 
>> @@@@ action: remote, param = 1
>> @@@@ table index i = 5
>> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:17558 function_remote:
>28260 param=1 digitbuf=17 source=2
>> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:17483 get_mem_set: 
>digitbuf=17
>> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:4225 retrieve_memory:
>memory=17 block=memory
>> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry:
>Tracepoint rpt_telemetry() entered mode=38
>> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry:
>Tracepoint rpt_telemetry() exit
>> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:17486 get_mem_set: 
>freq=146.520  res=0
>> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:12849
>collect_function_digits: rv=3
>> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry:
>Tracepoint rpt_telemetry() entered mode=3
>> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry:
>Tracepoint rpt_telemetry() exit
>> Mode
>> [Aug  1 15:06:09] NOTICE[2731]: app_rpt.c:13870 serial_remote_io:
>ioport=/dev/ttyS0 baud=14 iofd=0x19
>> String output was �� 
�'Ms:
>> FE FE 20 E0 08 01 FD 
>> [Aug  1 15:06:09] NOTICE[2732]: app_rpt.c:8420 wait_interval: Delay
>interval = 2000
>> [Aug  1 15:06:10] WARNING[2731]: app_rpt.c:13910 serial_remote_io:
>-99999 Serial device not responding on node 28260
>> Offset Initial/Simplex
>> Frequency
>> Offset
>> CTCSS
>> Frequency
>> [Aug  1 15:06:10] NOTICE[2731]: app_rpt.c:8420 wait_interval: Delay
>interval = 2000
>> [Aug  1 15:06:11] NOTICE[2732]: app_rpt.c:8424 wait_interval: Delay
>complete
>>     -- Hungup 'Zap/pseudo-1521668112'
>> [Aug  1 15:06:12] NOTICE[2731]: app_rpt.c:8424 wait_interval: Delay
>complete
>>     -- <Zap/pseudo-1162233705> Playing 'rpt/invalid-freq' (language
>'en')
>> 
>> At one point I added a statement to printf myrpt->remoterig variable
>in the check_freq function.
>> It returned "myrpt->remoterig=Mode"   ?????
>> Shouldn't that be  "xcat", or "remote_rig_xcat" ?
>> 
>> Any suggestions where I should be looking?
>> 
>> 
>>  
>> Robert A. Poff
>> Loganville, PA.
>> 
>> 
>> "Lieutenant, target the offending power boat and launch photon
>torpedoes"
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- 
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130801/cd7d9877/attachment.html>