[App_rpt-users] Connecting Nodes

[Barry Berg]

David GD4HOZ wrote:

> When I connect the virtual hub to another node and then key that node, when
> I let go the button ...
>
> David - GD4HOZ

Connecting nodes to a Hub ....     
First since it is not driving anything can a Raspberry Pi act as a Hub running the current release of Asterisk (i.e.  apt-get install asterisk) ?  Or do I need to generate a Centos Based Hub, and where in the documentation is do ing so, I looked but haven't found that yet.   If I can use a current version of Asterisk, rather than app_rpt how do I configure it?

Next how do I link nodes.     Assume I have a hub with a node number of 1010 and three remote base stations with node numbers 1110, 1210, 1310.   Assume I will be using the iaxrpt client.  When I press transmit on the iaxrpt client I want the transmission to go out on the three nodes.  If there is a transmission received on either 1110, 1210, or 1310 I want it to be received by the iaxrpt client, and transmitted out the other two nodes.   I am not sure if I need the hub, as I was told that 1310 can attach to 1210, which can attach to 1110, and the iaxrpt client can attach to 1110 as well and it will all work.   I haven't found the documentation on how to get nodes to attach to each other, or how to configure that.   

I would very much appreciate someone pointing me to the right documentation so I can try to set things up.

Thanks in advance,

Barry, K0BSB
Sent from my iPad