[App_rpt-users] Bleeping Hub

[Tim Sawyer]

The latest code is not pulled during installation. Always update after a fresh install.
--
Tim
:wq

On Aug 7, 2013, at 7:42 AM, David Osborn <david.osborn at manx.net> wrote:

> I have done this on many occasions but, now you mention it, I think that I haven't done it in this instance.
> 
> I must have thought that the latest was pulled down during installation - perhaps not.
> 
> Thanks for indulging a tinkerer :-)
> From: Tim Sawyer
> Sent: 07/08/2013 15:07
> To: app_rpt-users at ohnosec.org Users
> Subject: Re: [App_rpt-users] Bleeping Hub
> 
> Have you ever updated the source? https://allstarlink.org/support.html#astupgrade If not give it a try.
> --
> Tim
> :wq
> 
> On Aug 6, 2013, at 11:11 PM, David and Rhianne Osborn <david.osborn at manx.net> wrote:
> 
>> I omitted to clarify that this test was VMWare player and, to be honest, it does appear to sound and work OK, but I’ll heed the advice that it may misbehave.
>>  
>> If anyone could indulge my curiosity, though, where are these 6 beeps coming from? I disabled all CTs and also copied the rpt.conf from node 2483, which has run as a hub for a couple of years, and yet it still bleeps at me! If it’s relevant, the test hub has a private node address and doesn’t register with AllStar.
>>  
>> So, where’s the “beepy” bit? What’s it telling me?
>>  
>> Ta loads.
>>  
>> David
>>  
>>  
>> From: Jim W7RY [mailto:w7ry at centurytel.net] 
>> Sent: 07 August 2013 05:26
>> To: Tim Sawyer; David Osborn
>> Cc: app_rpt-users at ohnosec.org
>> Subject: Re: [App_rpt-users] Bleeping Hub
>>  
>> A node on VM Player works perfectly on a Windows 7 laptop. I have a node running on this Windows laptop.
>>  
>> Why doesn't it work in VMWare?
>>  
>> 73
>> Jim W7RY
>>  
>>  
>> From: Tim Sawyer
>> Sent: Tuesday, August 06, 2013 2:10 PM
>> To: David Osborn
>> Cc: app_rpt-users at ohnosec.org
>> Subject: Re: [App_rpt-users] Bleeping Hub
>>  
>> Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it...
>> --
>> Tim
>> :wq
>>  
>> On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn at manx.net> wrote:
>> 
>> 
>> Hey gang,
>>  
>> Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare.
>>  
>> Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep.
>>  
>> When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I’m accessing.
>>  
>> I believe that these beeps are coming from the V-Hub, but can’t figure out why.
>>  
>> Anyone got any ideas on this one?
>>  
>> Thanks
>>  
>> David – GD4HOZ
>>  
>>  
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>  
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130807/b22ab293/attachment.html>