[App_rpt-users] Bleeping Hub

[Matthew Dodd]

> On Aug 7, 2013, at 12:36 PM, Monty <monty at ke7jvx.com> wrote:
> 
> I had some weird noises coming from a node I installed on VMplayer on my windows 7 machine aswell.  In speaking with a few VM gurus they believed it was the time slicing VMplayer does that was causing it, and I was trying to use a URI.  Now, your mileage may very, but I have a HUB node and a URIx connected to my Proxmox server and both work flawless.  I did not do any custom modification to the install, but I did have to map the USB device to my Allstar VM through Proxmox.
> 
> Monty
> 
> 
>> On Wed, Aug 7, 2013 at 7:07 AM, Tim Sawyer <tim.sawyer at me.com> wrote:
>> Have you ever updated the source? https://allstarlink.org/support.html#astupgrade If not give it a try.
>> --
>> Tim
>> :wq
>> 
>>> On Aug 6, 2013, at 11:11 PM, David and Rhianne Osborn <david.osborn at manx.net> wrote:
>>> 
>>> I omitted to clarify that this test was VMWare player and, to be honest, it does appear to sound and work OK, but I’ll heed the advice that it may misbehave.
>>>  
>>> If anyone could indulge my curiosity, though, where are these 6 beeps coming from? I disabled all CTs and also copied the rpt.conf from node 2483, which has run as a hub for a couple of years, and yet it still bleeps at me! If it’s relevant, the test hub has a private node address and doesn’t register with AllStar.
>>>  
>>> So, where’s the “beepy” bit? What’s it telling me?
>>>  
>>> Ta loads.
>>>  
>>> David
>>>  
>>>  
>>> From: Jim W7RY [mailto:w7ry at centurytel.net] 
>>> Sent: 07 August 2013 05:26
>>> To: Tim Sawyer; David Osborn
>>> Cc: app_rpt-users at ohnosec.org
>>> Subject: Re: [App_rpt-users] Bleeping Hub
>>>  
>>> A node on VM Player works perfectly on a Windows 7 laptop. I have a node running on this Windows laptop.
>>>  
>>> Why doesn't it work in VMWare?
>>>  
>>> 73
>>> Jim W7RY
>>>  
>>>  
>>> From: Tim Sawyer
>>> Sent: Tuesday, August 06, 2013 2:10 PM
>>> To: David Osborn
>>> Cc: app_rpt-users at ohnosec.org
>>> Subject: Re: [App_rpt-users] Bleeping Hub
>>>  
>>> Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it...
>>> --
>>> Tim
>>> :wq
>>>  
>>> On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn at manx.net> wrote:
>>> 
>>> 
>>> Hey gang,
>>>  
>>> Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare.
>>>  
>>> Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep.
>>>  
>>> When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I’m accessing.
>>>  
>>> I believe that these beeps are coming from the V-Hub, but can’t figure out why.
>>>  
>>> Anyone got any ideas on this one?
>>>  
>>> Thanks
>>>  
>>> David – GD4HOZ
>>>  
>>>  
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>  
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130807/b91bf6e6/attachment.html>