[App_rpt-users] RTCM simulcast help

[Michael Hebert]

Very interesting. Playing around with the settings on both RTCMs and found
it works with menu 7 set for 600 and menu 18 set for 1.

If I set menu 18 to 0 the non master client, it will not transmit.

Also, I checked my rpt.conf and duplex=2


On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu at yahoo.com> wrote:

> This might sound like an odd question, but did chan_voter compile cleanly
> for you? I just grabbed the latest svn code and it did not compile for me
> at all. The error it gave me I would need to check tomorrow, as I'm
> currently not at the computer.
>
> Matthew Pitts
> N8OHU
>
> Sent from my Verizon Wireless 4G LTE smartphone
>
> -------- Original Message --------
> Subject:Re: [App_rpt-users] RTCM simulcast help
> From :Michael Hebert **
> Date :Sun, 11-Aug-2013 21:54
> To :Jim Duuuude **
> CC :app_rpt mailing list **
>
> Just changed both of them to 3000 and rebooted. Also, rebooted the
> asterisk machine.
>
> Still no TX on KD5DFB_site1=xxx,transmit
>
>
> On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant at hotmail.com>wrote:
>
>> well, why dont you try something higher then 480...
>>
>> ------------------------------
>> Date: Sun, 11 Aug 2013 20:37:49 -0500
>> Subject: Re: [App_rpt-users] RTCM simulcast help
>> From: mhebert1975 at gmail.com
>> To: telesistant at hotmail.com
>> CC: app_rpt-users at ohnosec.org
>>
>> 1) S/W Version: 1.26 08/10/2013 on both of them
>>
>> 2) 480 on both of them
>>
>>
>> On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant at hotmail.com>wrote:
>>
>> 1) What version of RTCM firmware are you running?
>>
>> 2) What do you have your TxBufferLength set to (in the RTCM) ?
>>
>> Jim
>>
>> ------------------------------
>> Date: Sun, 11 Aug 2013 19:43:36 -0500
>> From: mhebert1975 at gmail.com
>> To: app_rpt-users at ohnosec.org
>> Subject: [App_rpt-users] RTCM simulcast help
>>
>> All,
>>
>> I am trying to enable simulcast on my system. I have gone into the
>> voter.conf and added the "transmit" statement. The 2nd repeater is not
>> transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1
>> or the red TX indicator lighting up
>>
>> I have done a astres.sh and rebooted both RTCMs
>>
>> *Here is my voter.conf*
>>
>> [general]
>> port = 667
>> buflen = 120
>> password = xxx
>>
>> [28304]
>> KD5DFB_main=xxx,transmit,master
>> KD5DFB_site1=xxx,transmit
>>
>>
>> *Here is my menu 98 on the RTCM *
>>
>> GPS Lock: 1
>> Connected: 1
>> COR: 1
>> EXT CTCSS IN: 0
>> PTT: 0
>> RSSI: 255
>> Current Samples / Sec.: 8000
>> Current Peak Audio Level: 1496
>> Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134
>> Current Time: Mon  Aug 12, 2013  00:40:50.800
>> Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec
>> Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec
>> Last Rx Pkt index: 0, inbounds: 0
>>
>>
>> _______________________________________________ App_rpt-users mailing
>> list App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130811/dcd327dd/attachment.html>