[App_rpt-users] RTCM simulcast help

[Tim Sawyer]

Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.  

Are you getting any strange message on the Asterisk console with verbose level 3?
--
Tim
:wq

On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975 at gmail.com> wrote:

> Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1. 
> 
> If I set menu 18 to 0 the non master client, it will not transmit. 
> 
> Also, I checked my rpt.conf and duplex=2
> 
> 
> On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu at yahoo.com> wrote:
> This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
> 
> Matthew Pitts
> N8OHU 
> 
> Sent from my Verizon Wireless 4G LTE smartphone
> 
> -------- Original Message --------
> Subject:Re: [App_rpt-users] RTCM simulcast help
> From :Michael Hebert 
> Date :Sun, 11-Aug-2013 21:54
> To :Jim Duuuude 
> CC :app_rpt mailing list 
> 
> Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine. 
> 
> Still no TX on KD5DFB_site1=xxx,transmit
> 
> 
> On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant at hotmail.com> wrote:
> well, why dont you try something higher then 480...
> 
> Date: Sun, 11 Aug 2013 20:37:49 -0500
> Subject: Re: [App_rpt-users] RTCM simulcast help
> From: mhebert1975 at gmail.com
> To: telesistant at hotmail.com
> CC: app_rpt-users at ohnosec.org
> 
> 1) S/W Version: 1.26 08/10/2013 on both of them
> 
> 2) 480 on both of them
> 
> 
> On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant at hotmail.com> wrote:
> 1) What version of RTCM firmware are you running?
> 
> 2) What do you have your TxBufferLength set to (in the RTCM) ?
> 
> Jim
> 
> Date: Sun, 11 Aug 2013 19:43:36 -0500
> From: mhebert1975 at gmail.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] RTCM simulcast help
> 
> All,
> 
> I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up 
> 
> I have done a astres.sh and rebooted both RTCMs
> 
> Here is my voter.conf
> 
> [general]
> port = 667
> buflen = 120
> password = xxx
> 
> [28304]
> KD5DFB_main=xxx,transmit,master
> KD5DFB_site1=xxx,transmit
> 
> 
> Here is my menu 98 on the RTCM 
> 
> GPS Lock: 1
> Connected: 1
> COR: 1
> EXT CTCSS IN: 0
> PTT: 0
> RSSI: 255
> Current Samples / Sec.: 8000
> Current Peak Audio Level: 1496
> Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134
> Current Time: Mon  Aug 12, 2013  00:40:50.800
> Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec
> Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec
> Last Rx Pkt index: 0, inbounds: 0
> 
> 
> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130811/378267ac/attachment.html>