[App_rpt-users] RTCM simulcast help

[Michael Hebert]

I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.

No strange messages on level 3. Standard  Hungup 'Zap/pseudo-1855322317'

No TX on client 2 now


On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer at me.com> wrote:

> Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave
> the TX buffers long - around 2000 or 3000 until you figure out what is
> wrong.
>
> Are you getting any strange message on the Asterisk console with verbose
> level 3?
> --
> Tim
> :wq
>
> On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975 at gmail.com> wrote:
>
> Very interesting. Playing around with the settings on both RTCMs and found
> it works with menu 7 set for 600 and menu 18 set for 1.
>
> If I set menu 18 to 0 the non master client, it will not transmit.
>
> Also, I checked my rpt.conf and duplex=2
>
>
> On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu at yahoo.com> wrote:
>
>> This might sound like an odd question, but did chan_voter compile cleanly
>> for you? I just grabbed the latest svn code and it did not compile for me
>> at all. The error it gave me I would need to check tomorrow, as I'm
>> currently not at the computer.
>>
>> Matthew Pitts
>> N8OHU
>>
>> Sent from my Verizon Wireless 4G LTE smartphone
>>
>> -------- Original Message --------
>> Subject:Re: [App_rpt-users] RTCM simulcast help
>> From :Michael Hebert **
>> Date :Sun, 11-Aug-2013 21:54
>> To :Jim Duuuude **
>> CC :app_rpt mailing list **
>>
>> Just changed both of them to 3000 and rebooted. Also, rebooted the
>> asterisk machine.
>>
>> Still no TX on KD5DFB_site1=xxx,transmit
>>
>>
>> On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant at hotmail.com>wrote:
>>
>>> well, why dont you try something higher then 480...
>>>
>>> ------------------------------
>>> Date: Sun, 11 Aug 2013 20:37:49 -0500
>>> Subject: Re: [App_rpt-users] RTCM simulcast help
>>> From: mhebert1975 at gmail.com
>>> To: telesistant at hotmail.com
>>> CC: app_rpt-users at ohnosec.org
>>>
>>> 1) S/W Version: 1.26 08/10/2013 on both of them
>>>
>>> 2) 480 on both of them
>>>
>>>
>>> On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant at hotmail.com>wrote:
>>>
>>> 1) What version of RTCM firmware are you running?
>>>
>>> 2) What do you have your TxBufferLength set to (in the RTCM) ?
>>>
>>> Jim
>>>
>>> ------------------------------
>>> Date: Sun, 11 Aug 2013 19:43:36 -0500
>>> From: mhebert1975 at gmail.com
>>> To: app_rpt-users at ohnosec.org
>>> Subject: [App_rpt-users] RTCM simulcast help
>>>
>>> All,
>>>
>>> I am trying to enable simulcast on my system. I have gone into the
>>> voter.conf and added the "transmit" statement. The 2nd repeater is not
>>> transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1
>>> or the red TX indicator lighting up
>>>
>>> I have done a astres.sh and rebooted both RTCMs
>>>
>>> *Here is my voter.conf*
>>>
>>> [general]
>>> port = 667
>>> buflen = 120
>>> password = xxx
>>>
>>> [28304]
>>> KD5DFB_main=xxx,transmit,master
>>> KD5DFB_site1=xxx,transmit
>>>
>>>
>>> *Here is my menu 98 on the RTCM *
>>>
>>> GPS Lock: 1
>>> Connected: 1
>>> COR: 1
>>> EXT CTCSS IN: 0
>>> PTT: 0
>>> RSSI: 255
>>> Current Samples / Sec.: 8000
>>> Current Peak Audio Level: 1496
>>> Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134
>>> Current Time: Mon  Aug 12, 2013  00:40:50.800
>>> Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec
>>> Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec
>>> Last Rx Pkt index: 0, inbounds: 0
>>>
>>>
>>> _______________________________________________ App_rpt-users mailing
>>> list App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>>
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130811/fac4afca/attachment.html>