[App_rpt-users] Mastr II and URI low TX audio

[Mark Cheavens]

Same question,
But also:
How are you adjusting the audio in the radio?

The "normal" two places to inject are the MIC input, the second is 
the PL input.

I can "see" the pot in my head, but don't remember the number off my 
head for the deviation pot. You might be up against the limiter.

Mark
KC5EVE

At 05:12 AM 8/16/2013, Ross Johnson wrote:
>Hey bob
>Where are you injecting the audio? There should be plenty of 
>headroom. Is the mic still connected?
>
>Ross
><http://www.kc7rjk.net>www.kc7rjk.net
>
>From: <mailto:bob at w5evh.org>Bob Roszkowski
>Sent: Thursday, August 15, 2013 8:12 PM
>To: <mailto:App_rpt-users at ohnosec.org>App_rpt-users at ohnosec.org
>Subject: [App_rpt-users] Mastr II and URI low TX audio
>
>I have a Mastr II mobile tuned up in the ham bands.  Trying to set 
>the audio levels.  RX worked great.  Problem with TX audio, I can 
>only get 2KHz deviation max if I set the level to 999 in app_rpt.  I 
>am using the URI and have wired it to use the 6db amplifier on 
>board.  Anyone else run into this problem?
>
>boB - W5EVH
>
>
>----------
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130816/4a68bd06/attachment.html>