[App_rpt-users] Mastr II and URI low TX audio

[Bob Roszkowski]

Hey Ross,

I am connected to Pin 4 (Mic-Hi) of the front connector.  No mic and no
control head.

boB - W5EVH


On Fri, Aug 16, 2013 at 5:12 AM, Ross Johnson <kc7rjk at comcast.net> wrote:

>   Hey bob
> Where are you injecting the audio? There should be plenty of headroom. Is
> the mic still connected?
>
> Ross
> www.kc7rjk.net
>
>  *From:* Bob Roszkowski <bob at w5evh.org>
> *Sent:* Thursday, August 15, 2013 8:12 PM
> *To:* App_rpt-users at ohnosec.org
> *Subject:* [App_rpt-users] Mastr II and URI low TX audio
>
> I have a Mastr II mobile tuned up in the ham bands.  Trying to set the
> audio levels.  RX worked great.  Problem with TX audio, I can only get 2KHz
> deviation max if I set the level to 999 in app_rpt.  I am using the URI and
> have wired it to use the 6db amplifier on board.  Anyone else run into this
> problem?
>
> boB - W5EVH
>
> ------------------------------
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130816/815a808d/attachment.html>