[App_rpt-users] DTMF commands

[Robert Garcia]

Ben,

You may want to take a look at this config options to change the *
used to designate the beginning of a function to some other digit.

http://ohnosec.org/drupal/node/112

Robert
N5QM

On Fri, Aug 23, 2013 at 11:46 PM, Benjamin L. Naber <Benjamin at kb9lfz.com> wrote:
> Greetings All,
>
> I would like to know if it is 1.) Possible, and 2.) what file(s) need to
> be modified to change how DTMF commands are interpreted by the system.
>
> I'm working on a system in which the users do not have the * or # DTMF
> commands available on their radios. At this time, the users only options
> will be: connect to and disconnect from a node. The node numbers may be
> 2XXXX an above.
>
> In under for a user to connect to a node, the dial plan must see five
> digits as a valid node number, starting with the correct node number
> start. For this case, we'll use 20000 as the first node.
>
> So I thought of the users using '1(X)(..)' for commands. '1' followed by
> the node number to connect, and '12' to disconnect, for example.
>
> Could asterisk be made to recognize single or double digit DTMF tones as
> commands without using * ?
>
> ~Benjamin, KB9LFZ
> allstar node 28569
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users