[App_rpt-users] Asterisk ended with exit status 1

[Mark Johnston]

I had the same errors on my 64 bit computer, seems it was simply a matter
of using simpleusb instead of usbradio.conf in /etc/asterisk

Someone here may have an example config ...
On Aug 25, 2013 11:17 AM, "C B" <harvard5362 at yahoo.com> wrote:

> Hi
>
> I did what you suggested and it seems to complete without error.
>
> However it did not resolve the problem.
>
> I ran the same commands for Asterisk, still the same issue.
>
> Reran the Zaptel compile / install again and still no luck.
>
> I re-downloaded for the allstarlink.org the ISO for ACID in case what I
> downloaded originally was corrupt.
>
> after reinstalling I looked at the /root/acid­install.log and I did not
> see anything that looked like an error.
>
> Am I forgetting something or could my hardware not be combatable?
>
> As part of this project I did install this successfully on a different
> computer.
>
> Any help greatly appreciated.
>
> Chris
>
>    *From:* Paul J. Agamata <Sysman at Xceptions.COM>
> *To:* C B <harvard5362 at yahoo.com>
> *Sent:* Saturday, August 24, 2013 4:57 PM
> *Subject:* Re: [App_rpt-users] Asterisk ended with exit status 1
>
> Log into your 'root' account and navigate to the 'zaptel' directory.
>
> When your in there type the following:
>
> ./configure <enter>
> make <enter>
> make install <enter>
>
> Then reboot your computer and everything should be fine.
>
> _______________________________
> *Paul J. Agamata*
> *WH6FM*
> Sysman at Xceptions.COM
> Hilo, Hawaii
>
>
> From: C B <harvard5362 at yahoo.com>
> Reply-To: C B <harvard5362 at yahoo.com>
> Date: Saturday, August 24, 2013 1:54 PM
> To: Paul Agamata <Sysman at Xceptions.COM>
> Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
>
> Paul
>
> Please excuse my lack knowledge here, I am very unsure of the compile /
> install procedure you are speaking of.
>
> is there anything you can refer me to that will contain instructions on
> how to do this?
>
> Is it something I did wrong?
>
> Sorry for not having a lot of experience.
>
> And thank you for your help.
>
> Chris
>
> *From:* Paul J. Agamata <Sysman at Xceptions.COM>
> *To:* C B <harvard5362 at yahoo.com>; "app_rpt-users at ohnosec.org" <
> app_rpt-users at ohnosec.org>
> *Sent:* Saturday, August 24, 2013 4:46 PM
> *Subject:* Re: [App_rpt-users] Asterisk ended with exit status 1
>
> This is indicative of the zaptel drivers not in your kernel.
>  Compile/Install then reboot and all should be well.  The 'zaptel'
> directory is in the 'asterisk' source directory.
>
> Be aware that if you update your kernel you will need to re-install the
> zaptel modules.
>
> Regards,
> Paul
>
>
> _______________________________
> *Paul J. Agamata*
> *WH6FM*
> Sysman at Xceptions.COM
> Hilo, Hawaii
>
>
> From: C B <harvard5362 at yahoo.com>
> Date: Saturday, August 24, 2013 1:23 PM
> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> Subject: [App_rpt-users] Asterisk ended with exit status 1
>
> Hi
>
> I am attempting to build a ACID node.
>
> After several attempts of reinstalling the ACID with the same results I am
> asking for some help.
>
> All seems to complete normally, I download the configuration, reboot and
> the following error message keeps repeating.
>
> mpg123: no process killed
> Asterisk ended with exit status 1
> Asterisk died with code 1
> Automatically restarting Asterisk
>
> Computer is a HPdc5700 small form factor
> 1 GIG memory
> 500 GB SATA HDD
>
> than you in advance for any help
>
> Chris
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/4d92b914/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image[1].jpg
Type: image/jpeg
Size: 33234 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/4d92b914/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpg
Type: image/jpeg
Size: 33234 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/4d92b914/attachment-0001.jpg>