[App_rpt-users] Asterisk ended with exit status 1

[Ken]

Maybe your PC needs a BIOS update .

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?prodSeriesId=3
249646
<http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?prodSeriesId=
3249646&objectID=c01039267> &objectID=c01039267

 

Not saying you have this *particular* issue, but if yours is an older one,
it might be worth a try.

 

73

Ken

 

 

From: C B [mailto:harvard5362 at yahoo.com] 
Sent: Sunday, August 25, 2013 2:11 PM
To: Paul J. Agamata; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1

 

Hi

 

I did what you suggested and it seems to complete without error.

 

However it did not resolve the problem.

 

I ran the same commands for Asterisk, still the same issue.

 

Reran the Zaptel compile / install again and still no luck.

 

I re-downloaded for the allstarlink.org the ISO for ACID in case what I
downloaded originally was corrupt.

 

after reinstalling I looked at the /root/acid-install.log and I did not see
anything that looked like an error.

 

Am I forgetting something or could my hardware not be combatable?

 

As part of this project I did install this successfully on a different
computer.

 

Any help greatly appreciated.

 

Chris

 

From: Paul J. Agamata <Sysman at Xceptions.COM>
To: C B <harvard5362 at yahoo.com> 
Sent: Saturday, August 24, 2013 4:57 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1

 

Log into your 'root' account and navigate to the 'zaptel' directory.

 

When your in there type the following:

 

./configure <enter>

make <enter>

make install <enter>

 

Then reboot your computer and everything should be fine.


_______________________________ 
Paul J. Agamata

WH6FM

Sysman at Xceptions.COM
Hilo, Hawaii



 

From: C B <harvard5362 at yahoo.com>
Reply-To: C B <harvard5362 at yahoo.com>
Date: Saturday, August 24, 2013 1:54 PM
To: Paul Agamata <Sysman at Xceptions.COM>
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1

 

Paul

 

Please excuse my lack knowledge here, I am very unsure of the compile /
install procedure you are speaking of.

 

is there anything you can refer me to that will contain instructions on how
to do this?

 

Is it something I did wrong? 

 

Sorry for not having a lot of experience.

 

And thank you for your help.

 

Chris

 

From: Paul J. Agamata <Sysman at Xceptions.COM>
To: C B <harvard5362 at yahoo.com>; "app_rpt-users at ohnosec.org"
<app_rpt-users at ohnosec.org> 
Sent: Saturday, August 24, 2013 4:46 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1

 

This is indicative of the zaptel drivers not in your kernel.
Compile/Install then reboot and all should be well.  The 'zaptel' directory
is in the 'asterisk' source directory.

 

Be aware that if you update your kernel you will need to re-install the
zaptel modules.

 

Regards,

Paul

 


_______________________________ 
Paul J. Agamata

WH6FM

Sysman at Xceptions.COM
Hilo, Hawaii



 

From: C B <harvard5362 at yahoo.com>
Date: Saturday, August 24, 2013 1:23 PM
To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: [App_rpt-users] Asterisk ended with exit status 1

 

Hi

 

I am attempting to build a ACID node.

 

After several attempts of reinstalling the ACID with the same results I am
asking for some help.

 

All seems to complete normally, I download the configuration, reboot and the
following error message keeps repeating.

 

mpg123: no process killed

Asterisk ended with exit status 1

Asterisk died with code 1

Automatically restarting Asterisk

 

Computer is a HPdc5700 small form factor

1 GIG memory

500 GB SATA HDD

 

than you in advance for any help

 

Chris

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/f6bafa9a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 33234 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/f6bafa9a/attachment.jpg>