[App_rpt-users] Asterisk ended with exit status 1

[C B]

Hi
 
I believe I only enabled the COR.
 
it would seem that I should find a older computer perhaps.
 
Chris
 

________________________________
 From: Pierre Martel <petem001 at hotmail.com>
To: C B <harvard5362 at yahoo.com> 
Sent: Sunday, August 25, 2013 1:37 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
  


I had the same problem and was suspecting dsp.  

I did un update to latest svn. and was stillg etting same thing. 

Are you using any dsp on your node? ctcss decoding, cor, ect? 


From: C B  
Sent: Sunday, August 25, 2013 2:10 PM 
To: Paul J. Agamata ; app_rpt-users at ohnosec.org  
Subject: Re: [App_rpt-users] Asterisk ended with exit status 
1 
 Hi 
  
I did what you suggested and it seems to complete without 
error. 
  
However it did not resolve the problem. 
  
I ran the same commands for Asterisk, still the same 
issue. 
  
Reran the Zaptel compile / install again and still no 
luck. 
  
I re-downloaded for the allstarlink.org the ISO for ACID in case what 
I downloaded originally was corrupt. 
  
after reinstalling I looked at the /root/acid­install.log and I 
did not see anything that looked like an error. 
  
Am I forgetting something or could my hardware not be 
combatable? 
  
As part of this project I did install this successfully on a 
different computer. 
  
Any help greatly appreciated. 
  
Chris 


________________________________
From: Paul J. Agamata 
<Sysman at Xceptions.COM>
To: C B <harvard5362 at yahoo.com> 
Sent: Saturday, August 24, 
2013 4:57 PM
Subject: Re: 
[App_rpt-users] Asterisk ended with exit status 1
 


Log into your 'root' account and navigate to the 'zaptel' directory. 

When your in there type the following: 

./configure <enter> 
make <enter> 
make install <enter> 


Then reboot your 
computer and everything should be fine.
_______________________________ 
Paul J. Agamata 
WH6FM 
Sysman at Xceptions.COM
Hilo, 
Hawaii

 
From: C B <harvard5362 at yahoo.com>
Reply-To: C B <harvard5362 at yahoo.com>
Date: Saturday, August 24, 2013 1:54 
PM
To: Paul Agamata <Sysman at Xceptions.COM>
Subject: Re: [App_rpt-users] Asterisk ended 
with exit status 1
 

Paul 
  
Please excuse my lack knowledge here, I am very unsure of the compile 
/ install procedure you are speaking of. 
  
is there anything you can refer me to that will contain instructions 
on how to do this? 
  
Is it something I did wrong?  
  
Sorry for not having a lot of experience. 
  
And thank you for your help. 
  
Chris 


________________________________
From: Paul J. 
Agamata <Sysman at Xceptions.COM>
To: C B <harvard5362 at yahoo.com>; "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org> 
Sent: Saturday, August 24, 
2013 4:46 PM
Subject: Re: 
[App_rpt-users] Asterisk ended with exit status 1
 


This is indicative of the zaptel drivers not in your kernel.  
Compile/Install then reboot and all should be well.  The 'zaptel' directory 
is in the 'asterisk' source directory. 

Be aware that if you update your kernel you will need to re-install the 
zaptel modules. 

Regards, 
Paul 


_______________________________ 
Paul J. Agamata 
WH6FM 
Sysman at Xceptions.COM
Hilo, 
Hawaii

 
From: C B <harvard5362 at yahoo.com>
Date: Saturday, August 24, 2013 1:23 
PM
To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: [App_rpt-users] Asterisk ended with 
exit status 1
 

Hi 

I am attempting to build a ACID node. 

After several attempts of reinstalling the ACID with the same results I am 
asking for some help. 

All seems to complete normally, I download the configuration, reboot and 
the following error message keeps repeating. 

mpg123: no process killed 
Asterisk ended with exit status 1 
Asterisk died with code 1 
Automatically restarting Asterisk 

Computer is a HPdc5700 small form factor 
1 GIG memory 
500 GB SATA HDD 

than you in advance for any help 

Chris 




 

________________________________

_______________________________________________
App_rpt-users mailing 
list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/d5ff0c01/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image
Type: image/jpeg
Size: 33234 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/d5ff0c01/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpg
Type: image/jpeg
Size: 33234 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/d5ff0c01/attachment.jpg>