[App_rpt-users] Asterisk ended with exit status 1

[C B]

Hi
 
Updated BIOS to latest and no help.
 
Chris
 

________________________________
 From: Ken <ke2n at cs.com>
To: 'C B' <harvard5362 at yahoo.com>; 'Paul J. Agamata' <Sysman at Xceptions.COM>; app_rpt-users at ohnosec.org 
Sent: Sunday, August 25, 2013 11:27 AM
Subject: RE: [App_rpt-users] Asterisk ended with exit status 1
  


Maybe your PC needs a BIOS update …
 
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?prodSeriesId=3249646&objectID=c01039267
 
Not saying you have this *particular* issue, but if yours is an older one, it might be worth a try…
 
73
Ken
 
 
From:C B [mailto:harvard5362 at yahoo.com] 
Sent: Sunday, August 25, 2013 2:11 PM
To: Paul J. Agamata; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
 
Hi
 
I did what you suggested and it seems to complete without error.
 
However it did not resolve the problem.
 
I ran the same commands for Asterisk, still the same issue.
 
Reran the Zaptel compile / install again and still no luck.
 
I re-downloaded for the allstarlink.org the ISO for ACID in case what I downloaded originally was corrupt.
 
after reinstalling I looked at the /root/acid­install.log and I did not see anything that looked like an error.
 
Am I forgetting something or could my hardware not be combatable?
 
As part of this project I did install this successfully on a different computer.
 
Any help greatly appreciated.
 
Chris
 
From:Paul J. Agamata <Sysman at Xceptions.COM>
To: C B <harvard5362 at yahoo.com> 
Sent: Saturday, August 24, 2013 4:57 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
 
Log into your 'root' account and navigate to the 'zaptel' directory.
 
When your in there type the following:
 
./configure <enter>
make <enter>
make install <enter>
 
Then reboot your computer and everything should be fine.

_______________________________ 
Paul J. Agamata
WH6FM
Sysman at Xceptions.COM
Hilo, Hawaii


 
From: C B <harvard5362 at yahoo.com>
Reply-To: C B <harvard5362 at yahoo.com>
Date: Saturday, August 24, 2013 1:54 PM
To: Paul Agamata <Sysman at Xceptions.COM>
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
 
Paul
 
Please excuse my lack knowledge here, I am very unsure of the compile / install procedure you are speaking of.
 
is there anything you can refer me to that will contain instructions on how to do this?
 
Is it something I did wrong? 
 
Sorry for not having a lot of experience.
 
And thank you for your help.
 
Chris
 
From:Paul J. Agamata <Sysman at Xceptions.COM>
To: C B <harvard5362 at yahoo.com>; "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org> 
Sent: Saturday, August 24, 2013 4:46 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
 
This is indicative of the zaptel drivers not in your kernel.  Compile/Install then reboot and all should be well.  The 'zaptel' directory is in the 'asterisk' source directory.
 
Be aware that if you update your kernel you will need to re-install the zaptel modules.
 
Regards,
Paul
 

_______________________________ 
Paul J. Agamata
WH6FM
Sysman at Xceptions.COM
Hilo, Hawaii


 
From: C B <harvard5362 at yahoo.com>
Date: Saturday, August 24, 2013 1:23 PM
To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: [App_rpt-users] Asterisk ended with exit status 1
 
Hi
 
I am attempting to build a ACID node.
 
After several attempts of reinstalling the ACID with the same results I am asking for some help.
 
All seems to complete normally, I download the configuration, reboot and the following error message keeps repeating.
 
mpg123: no process killed
Asterisk ended with exit status 1
Asterisk died with code 1
Automatically restarting Asterisk
 
Computer is a HPdc5700 small form factor
1 GIG memory
500 GB SATA HDD
 
than you in advance for any help
 
Chris
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/9411a96d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 33234 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130825/9411a96d/attachment.jpg>