[App_rpt-users] Asterisk ended with exit status 1

[C B]

Thank you
 
Yes the LAN works, and it shows up on the Allstar list as active
 
Cool as I am leaving in a few hours to Texas, I will try it over the weekend when I return.
 
Chris
 

________________________________
 From: David Osborn <david.osborn at manx.net>
To: C B <harvard5362 at yahoo.com>; "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org> 
Sent: Monday, August 26, 2013 12:18 PM
Subject: RE: [App_rpt-users]  Asterisk ended with exit status 1
  


Best thing is to try it :-)

As I understand it, ACPI looks after power management. You may be able to run without it.

I'm glad it had an effect as it helps to localise the problem.

Does your LAN adapter come up? If so you could be well on the way.

David


________________________________
From: C B
Sent: 26/08/2013 19:54
To: David Osborn; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users]  Asterisk ended with exit status 1


Hi
 
I tried the following and it did stop the error massages.
 
- Disable ACPI and reboot your system. You need to edit /boot/grub/grub.conf and modify kernel parameters as follows:

kernel /vmlinuz-2.6.18-53.1.4.el5 ro root=LABEL=/ vga=0x314 acpi=off
 
However I am not sure what ACPI does for the allstar link.
 
will this have any negative impacts?
 
or does this tell anyone what the problem may be?
 
Chris
 

________________________________
 From: David Osborn <david.osborn at manx.net>
To: app_rpt-users at ohnosec.org 
Sent: Monday, August 26, 2013 10:10 AM
Subject: [App_rpt-users]  Asterisk ended with exit status 1
  




I claim no expert knowledge here but I was mucking around trying to get Acid running on a thin client – just for the heck of it really. Anyway, I got this error message, along with the log messages about a problem with the Zaptel Configuration, and I found a reference to this issue here: http://www.easyasterisk.org/modules/smartfaq/faq.php?faqid=1
 
Booting the thin client with ACPI disabled cured the problem with Zaptel, but then the LAN port wouldn’t come up L so I was still stymied!
 
Anyway I don’t know if this will help, but it might be worth a go.
 
David Osborn
 
GD4HOZ
 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130826/5279828a/attachment.html>