[App_rpt-users] 2 sites, 5 radios

[Tom King]

Site A:

2 repeaters: 2M, 6M
Easier to get to but internet shakey

Site B:

3 Repeaters: 2M, 220, 440
Harder to get to but better Internet

I can put a wifi link between them  (2 mile shot across a saddle)

Primary use is Standalone repeaters but Cross connecting and linking to
buildings without good visibility to the sites very likely.

They are only 7 and 9 miles away but take at least 2hrs to get to.

(I've inherited these in the last 48hrs and want to unify control and
linking)

I just started with allstar about 3 weeks ago so I'm not fully up on what
can be done

So I guess the questions are:

1. What (relatively) Cost Effective way to do this?

2.  if I have good power for the computers (run them off of a 12v battery)
and reasonable computer hardware would Limey work?
     (I don't like spinning things on mountaintops if I can avoid them as
they fail at the most inopportune times)

3. a bunch of URI's or use PCI radio cards?


Thanks

Tom
KA6SOX
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130827/748accd0/attachment.html>