[App_rpt-users] RXONDELAY not working?

[KJ6KO]

Simplex. (duplex=0)   Talks directly to and listens to a repeater, but the repeater's TX PL goes away when no input.  It gets a quick "glimpse" of it once in a while and causes a "bounceback".  100ms delay or less would cure that.
  ----- Original Message ----- 
  From: mike at midnighteng.com 
  To: KJ6KO 
  Sent: Wednesday, August 28, 2013 8:44 AM
  Subject: RE: [App_rpt-users] RXONDELAY not working?




  I "think" that it's use is dependent on duplex mode ??
  What duplex mode are you using in rpt.conf?


  mike/kb8jnm


    -------- Original Message --------
    Subject: [App_rpt-users] RXONDELAY not working?
    From: "KJ6KO" <kj6ko at innercite.com>
    Date: Wed, August 28, 2013 11:15 am
    To: <App_rpt-users at ohnosec.org>


    simpleusb.conf
    setting rxondelay=x to any number makes no difference.  Does something else need to be set for it to work?  Tried it from 2 up to 50 and no change in the actual delay.

    Anyone?  Saw another identical post from 2011 and there was NO reply!

    Thanks...

    KJ6KO




__________ Information from ESET NOD32 Antivirus, version of virus signature database 8738 (20130828) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130828/2c205b9b/attachment.html>