[App_rpt-users] RXONDELAY not working?

[Jeff Carrier]

I'm running an hp thinclient that has a single core processor at barely
over 1 ghz with like 512mb of ram and it's ok.  It is not running full
duplex audio though.  It has two simplex link radios attached.  This
installation is how I found out RXONDELAY wouldn't work with simple usb.


On Wed, Aug 28, 2013 at 10:15 AM, KJ6KO <kj6ko at innercite.com> wrote:

> **
> What kind of "horsepower" are we talking about?  memory or processor or
> both?  Running 2.6G with 1.5G of memory.  Was planning on stealing .5G for
> another box.  Would 1G be enough after the robbery?  Entire system only
> seems to use less than 0.4G now.
>
> Thanks for the link too!  I will look into it!  I may be able to drop the
> rptr's PL sooner also.  I like to keep things simple!
>
> ----- Original Message -----
> *From:* Jeff Carrier <k0jsc.jeff at gmail.com>
> *To:* KJ6KO <kj6ko at innercite.com>
> *Cc:* app_rpt mailing list <App_rpt-users at ohnosec.org>
> *Sent:* Wednesday, August 28, 2013 8:59 AM
> *Subject:* Re: [App_rpt-users] RXONDELAY not working?
>
> It works with any usb devices as far as I know.  Usbradio gives you DSP
> support and SimpleUSB has no DSP support.  As long as the processor in your
> node has enough horsepower USBRADIO should be fine.  see this post to
> change from simple usb to usb radio.
> http://ohnosec.org/pipermail/app_rpt-users/2011-October/003235.html
>
>
> On Wed, Aug 28, 2013 at 9:52 AM, KJ6KO <kj6ko at innercite.com> wrote:
>
>> **
>> That explains a lot, except why it is even in the simpleusb.conf file in
>> the first place.
>>
>> I have heard that you can use usbradio.conf to drive the DMK URI but have
>> never tried it.  Will it work then or is it a DMK thing?
>>
>> Thanks....
>>
>> ----- Original Message -----
>> *From:* Jeff Carrier <k0jsc.jeff at gmail.com>
>> *To:* KJ6KO <kj6ko at innercite.com>
>> *Cc:* app_rpt mailing list <App_rpt-users at ohnosec.org>
>> *Sent:* Wednesday, August 28, 2013 8:28 AM
>> *Subject:* Re: [App_rpt-users] RXONDELAY not working?
>>
>> rxondelay only works with usbradio, it does not work with simpleusb.
>>
>> 73 de K0JSC
>>
>>
>> On Wed, Aug 28, 2013 at 9:15 AM, KJ6KO <kj6ko at innercite.com> wrote:
>>
>>> **
>>> simpleusb.conf
>>> setting* rxondelay=x* to any number makes no difference.  Does
>>> something else need to be set for it to work?  Tried it from 2 up to 50 and
>>> no change in the actual delay.
>>>
>>> Anyone?  Saw another identical post from 2011 and there was NO reply!
>>>
>>> Thanks...
>>>
>>> KJ6KO
>>>
>>> __________ Information from ESET NOD32 Antivirus, version of virus
>>> signature database 8737 (20130828) __________
>>>
>>> The message was checked by ESET NOD32 Antivirus.
>>>
>>> http://www.eset.com
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>
>>
>> __________ Information from ESET NOD32 Antivirus, version of virus
>> signature database 8737 (20130828) __________
>>
>> The message was checked by ESET NOD32 Antivirus.
>>
>> http://www.eset.com
>>
>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 8738 (20130828) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130828/e13a4ad6/attachment.html>