[App_rpt-users] Turn off dis/connect messages but not other telemetry? (corrected)

[Doug Crompton]

OK that sounds like a good thing to try. I assume this only applies to the connect/disconnect messages and not other telemetry audio?
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Subject: Re: [App_rpt-users] Turn off dis/connect messages but not other telemetry? (corrected)
From: tim.sawyer at mac.com
Date: Wed, 4 Dec 2013 20:01:19 -0800
CC: app_rpt-users at ohnosec.org
To: doug at crompton.com

It means that when you issue a link command, for example *32000, the connect message will play back to you. Then, for a short while, like 30 or 60 seconds, you will here any dis/connects even if you did not initiate them. After the 30-60 second timer times expires you will not hear any more dis/connects until you initiate another link command. 

--
Tim
:wq


On Dec 4, 2013, at 7:32 PM, Doug Crompton <doug at crompton.com> wrote:Tim,

  Thanks, missed that.  Can you define what this means?
2 = timed telemetry output on command execution and for a short time thereafter 

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Subject: Re: [App_rpt-users] Turn off dis/connect messages but not other telemetry? (corrected)
From: tim.sawyer at mac.com
Date: Wed, 4 Dec 2013 08:40:19 -0800
CC: t.schoentag at web.de; app_rpt-users at ohnosec.org
To: doug at crompton.com

Did you see this? http://ohnosec.org/drupal/node/103
--
Tim
:wq
On Dec 4, 2013, at 7:57 AM, Doug Crompton <doug at crompton.com> wrote:I checked the source and there are no comments on the telemetry default (telemdefault) setting nor does there seem to be any specific info page on that command at ohnosec.org

Perhaps a developer could comment?

Did you look at the 'holdofftelem' command?

http://ohnosec.org/drupal/node/110

There is also 'telemdynamic' which I can't seem to find info on either. Comprehensive documentation on the telemetry commands seems to be lacking. I guess we are expected to snake through the source and figure it out!

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: t.schoentag at web.de
> To: app_rpt-users at ohnosec.org
> Date: Wed, 4 Dec 2013 09:47:18 +0100
> Subject: [App_rpt-users] Turn off dis/connect messages but not other	telemetry? (corrected)
> 
> 
>  
>  
> 
> Sorry, there are any mistakes in my first posting here is the corrected posting:
> 
> Hello, very thanks for your quickly resolutions,
>  
> I would like to switch off all connect/disconnect messages (anouncements). I have
>  
> telemdefault=2
> echolinkdefault=2.
>  
> For echolink that work, there are no  messages, but for linking from/to other allstar nodes or for linking from allstar webtranceiver there are all messages online.
> If I set
>  
> telemdefault=0
>  
> all messages are off, realy all!
> Is it possible to switch off the dis/connect messages but not the other telemetry, pehaps *81 time ...?
>  
> A other solution for my problem could be a shorter dis/connect message. In the moment I hear "DL7VTS connected to node 91246" or "node 12345 connected to node 91246" (in phonetic). Is it possible to use only "DL7VTS connected". This is half off the audio traffic, has the same information and is more usefull?
> eannmode=0 is only for echolink and has not this function! I think it is to change in the sources but I need a tip (filename ..)
>  
>  
> Thanks for help, Thomas, DL7VTS
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131204/aeceaf32/attachment.html>