[App_rpt-users] Turn off dis/connect messages but not other telemetry? (corrected)

[Tim Sawyer]

That’s correct.
--
Tim
:wq

On Dec 4, 2013, at 8:44 PM, Doug Crompton <doug at crompton.com> wrote:

> OK that sounds like a good thing to try. I assume this only applies to the connect/disconnect messages and not other telemetry audio?
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> Subject: Re: [App_rpt-users] Turn off dis/connect messages but not other telemetry? (corrected)
> From: tim.sawyer at mac.com
> Date: Wed, 4 Dec 2013 20:01:19 -0800
> CC: app_rpt-users at ohnosec.org
> To: doug at crompton.com
> 
> It means that when you issue a link command, for example *32000, the connect message will play back to you. Then, for a short while, like 30 or 60 seconds, you will here any dis/connects even if you did not initiate them. After the 30-60 second timer times expires you will not hear any more dis/connects until you initiate another link command. 
> --
> Tim
> :wq
> 
> On Dec 4, 2013, at 7:32 PM, Doug Crompton <doug at crompton.com> wrote:
> 
> Tim,
> 
>   Thanks, missed that.  Can you define what this means?
> 
> 2 = timed telemetry output on command execution and for a short time thereafter 
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> Subject: Re: [App_rpt-users] Turn off dis/connect messages but not other telemetry? (corrected)
> From: tim.sawyer at mac.com
> Date: Wed, 4 Dec 2013 08:40:19 -0800
> CC: t.schoentag at web.de; app_rpt-users at ohnosec.org
> To: doug at crompton.com
> 
> Did you see this? http://ohnosec.org/drupal/node/103
> --
> Tim
> :wq
> 
> On Dec 4, 2013, at 7:57 AM, Doug Crompton <doug at crompton.com> wrote:
> 
> I checked the source and there are no comments on the telemetry default (telemdefault) setting nor does there seem to be any specific info page on that command at ohnosec.org
> 
> Perhaps a developer could comment?
> 
> Did you look at the 'holdofftelem' command?
> 
> http://ohnosec.org/drupal/node/110
> 
> There is also 'telemdynamic' which I can't seem to find info on either. Comprehensive documentation on the telemetry commands seems to be lacking. I guess we are expected to snake through the source and figure it out!
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> > From: t.schoentag at web.de
> > To: app_rpt-users at ohnosec.org
> > Date: Wed, 4 Dec 2013 09:47:18 +0100
> > Subject: [App_rpt-users] Turn off dis/connect messages but not other	telemetry? (corrected)
> > 
> > 
> >  
> >  
> > 
> > Sorry, there are any mistakes in my first posting here is the corrected posting:
> > 
> > Hello, very thanks for your quickly resolutions,
> >  
> > I would like to switch off all connect/disconnect messages (anouncements). I have
> >  
> > telemdefault=2
> > echolinkdefault=2.
> >  
> > For echolink that work, there are no  messages, but for linking from/to other allstar nodes or for linking from allstar webtranceiver there are all messages online.
> > If I set
> >  
> > telemdefault=0
> >  
> > all messages are off, realy all!
> > Is it possible to switch off the dis/connect messages but not the other telemetry, pehaps *81 time ...?
> >  
> > A other solution for my problem could be a shorter dis/connect message. In the moment I hear "DL7VTS connected to node 91246" or "node 12345 connected to node 91246" (in phonetic). Is it possible to use only "DL7VTS connected". This is half off the audio traffic, has the same information and is more usefull?
> > eannmode=0 is only for echolink and has not this function! I think it is to change in the sources but I need a tip (filename ..)
> >  
> >  
> > Thanks for help, Thomas, DL7VTS
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131204/f954b61c/attachment.html>